Your shopping cart is empty!
Your shopping cart is empty!
The Bluesocket outdoor wireless bridge/AP utilizes 802.11a to support a point-to-point or point-to-multipoint building-to-building bridge function, while simultaneously using 802.11b/g to support wireless connection for outdoor user access. The outdoor AP is designed with a rugged weatherproof housing, a durable mounting bracket, includes weatherproof Ethernet and console cables, and a PoE power inserter.Product Type: Wireless Access Point Wi-Fi Standard: IEEE 802.11a/b/g ISM Band: Yes UNII Band: Yes ISM ..
Bluesocket High Performance Controller with four managed GbE (10/100/1000) ports which are PoE capable, and a Protected GbE (10/100/1000) interface. Supports up to 200 users and 25 APsNumber of APs Supported: 25 Typical Deployment: Branch OfficeNetwork Interfaces: Data Interfaces: Four GbE Managed & One GbE Protected Other: One 10/100 Fail-overProduct Features:Architecture supports future 802.11 standards and access points from all major vendors without architectural changes or the need for cost..
The ADTRAN MX3208 Controller Card is a plug-in unit for the MX3 Chassis that provides eight DSX-1 drops from up to two DS3s. The remaining DS1s may be routed between the DS3s or to optional drop modules in the MX3 Chassis. Two MX3208 Controller Cards are used together to provide a redundant circuit...
The Adtran DSU 56/64 provides a cost-effective solution for termination of 56 or 64kbps DDS services. This DSU is a very economical solution for single port point-to-point, multi-point or frame relay applications. Extensive use of VLSI technology provides a highly reliable feature-rich DSU, and the enclosure for the DSU 56/64 is a small, attractive, slim-line package that is wall mountable, rack mountable or can sit on a desktop. The DSU 56/64 provides both a physical and electrical V.35 DTE interface, whic..
Blank panel for the DSPM; utilized when a module is not inserted...
AdTran 1200.065L1 or 1200065L1, a single port DS-1 T1 drop and insert card with option for one more port. Can only be installed in slot 6 of TSU-600 and TSU-600e. The Drop and Insert (D&I) Module from Adtran provides a secondary T1 (1.544 Mbps) interface to telco or to private T1 facilities. By adding the D&I Module to a TSU Multiplexer, the user has the capability to support two independent T1s for data, voice, or video, eliminating the need for a second multiplexer. The module provides the capability to s..
The ADTRAN DSU 5600 provides a cost-effective solution for termination of 56 or 64 kbps DDS services. The unit is a very economical solution for single port point-to-point or multi-point applications. Microprocessor and VLSI technology enhance the capabilities of the DSU 5600, which is housed in an attractive, slim line, stand-alone, wall-mount, or rackmount enclosure.Provides cost-effective method fortermination of DDS services, Slim packaging can be installed on the desktop, mounted on wall, or housed i..
The ADTRAN DSU III AR is a technologically advanced, high performance data service unit/channel service unit (DSU/CSU). This unit provides a reliable interface between the digital data service (DDS) or 4-wire Switched 56 (SW56) network and the customer s data terminal equipment (DTE). The unit is an all-rate DSU/CSU supporting synchronous and asynchronous data rates on the primary channel.Receiver Sensitivity: -45 dB at all rates , Switched Mode Dialing Options: Stored number, Front panel keypad, DTR dial..
The ADTRAN DSU IV ESP is an all-rate data service/channel service unit (DSU/CSU) with an integral SNMP (simple network management protocol) agent and optional dial backup (DBU) capabilities. It provides an interface between digital data service (DDS) or 4-wire Switched 56 and the customer's data terminal equipment (DTE)...
