Cisco NM-2FE2W 2x 10/100 Ethernet 2 WAN Card Slot Network Module
This mixed-media network module has two full/half duplex, auto-sensing 10/100 Ethernet port and 2 WAN Interface Card (WIC) expansion slots, supporting all current WICs and VWICs. The 10/100 Ethernet connections are via RJ-45 connectors.
Modular Router Solutions: LAN-to-LAN Routing, VPN & Firewall Solutions, DSL Access, Dialup Remote Access, ISDN Concentration, Serial & Legacy Concentration The Maximum Number of NMs that can be utilized in each of the 2600/3600 families is as follows:, 2691: 1, 3620: 2, 3640: 4, 3660: 6, 3725: 2, 3745: 4 Protocols supported:, Full Cisco IOS software as of 12.0(7)XK WIC Performance:, Up to 8Mb/s per WIC (with just 1 WIC installed) , Uses the same Fast Ethernet controller as all other Cisco 2600/3600 Fast Ethernet ports, WICs are not hot swappable. The network modules support hot swap in the Cisco 3660., Supports a maximum of two channel groups per VWIC, Does not support ISDN PRI, Does not support Fast EtherChannel Comments:, No reliance on other network modules, WAN interface cards, voice interface cards, or advanced integration modules. Will only operate in 3600 series routers.
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: NM-2FE2W=
Brand Name: Cisco
Product Model: NM-1FE-FX-V2
Product Name: Network Module
Product Type: Network Module
Application/Usage: Data Networking
Interfaces/Ports: 2 x 10/100Base-TX LAN
Interfaces/Ports Details: 2 x RJ-45 10/100Base-TX Auto-sensing LAN
Connectivity Media: Twisted Pair 10/100Base-TX
Data Transfer Rate: 10 Mbps Ethernet Half/Full-duplex
Data Transfer Rate: 100 Mbps Fast Ethernet Half/Full-duplex
Expansion Slots: 2 x WIC/VWIC
Status Indicators: Ethernet 10/100 Speed Indication, Link and full Duplex LEDS
MTBF: 569302 Hour
Power Consumption: 15 W Maximum @
Temperature: 32°F (0°C) to 104°F (40°C) Operating
Temperature: -13°F (-25°C) to 158°F (70°C) Non-operating
Humidity: 5% to 95% Relative Humidity
Dimensions: 1.6" Height x 7.1" Width x 7.2" Depth
Weight (Approximate): 2.50 lb Maximum
System Requirements: The minimum level of IOS is IOS 12.0(7)XK or 12.1(1)T
This Cisco NM-2FE2W 2x 10/100 Ethernet 2 WAN Card Slot Network Module is in refurbished condition and is fully guaranteed by our 90-day warranty. Please feel free to contact us regarding our inventory of refurbished Cisco networking equipment, or if you have any additional questions regarding this NM-2FE2W 2x 10/100 Ethernet 2 WAN Card Slot Network Module.
United States of America Shipping
Orders for this Cisco NM-2FE2W unit which qualify for Free Super-Saver Shipping are shipped at our discretion via the lowest cost method. We use FedEx, UPS, and US Postal Service as shipping carriers. We cannot ship this Cisco NM-2FE2W within the USA by billing directly to your shipper account number. All shipping charges must be pre-paid at checkout.
International / Foreign Shipping
Cisco NM-2FE2W 2x 10/100 Ethernet 2 WAN Card Slot Network Module units which are shipped internationally have a mandatory 2-5 business day security holding period between payment being received and shipment processing. This security policy is to allow funds to fully clear our bank account. International transport costs can be charged directly to your FedEx account number. We cannot ship internationally using your DHL, TNT, or UPS account number.
Expedited and Rush Shipping
HardwareJet.com can usually provide expedited (1 or 2 day shipping) for Cisco products; however there is an additional rush fee per unique Cisco NM-2FE2W 2x 10/100 Ethernet 2 WAN Card Slot Network Module unit in addition to the product cost and expedited carrier shipping charges. If we can offer expedited shipping for an item, expedited shipping costs will be shown at checkout. If we cannot provide expedited shipping for an item, then you will not be presented with these options during the cart checkout process.