One-Port OC-48c/STM-16c POS/SDH line card which provides a unique combination of performance and class-of-service (CoS) features for delivering advanced end-to-end networking features. The high performance switching engine integrates WRED and our innovative ASIC-based queue scheduling algorithm Modified Deficit Round Robin (MDRR). These allow service providers to offer differentiated services with deterministic traffic behavior in the core of the network.Manufacturer: Cisco Systems, Inc
Manufacturer Part ..
The Cisco 1-Port OC12c/STM4c ATM Shared Port Adapter for Cisco XR 12000 Series Routers and the Cisco CRS-1 Carrier Routing System. The Cisco ATM SPA, in conjunction with other SPA implementing various types of network technologies, allow the user to flexibly build cost-effective routing solutions focusing on point-of-presence (POP) edge, customer premises equipment (CPE), and enterprise applications.Switched-virtual- circuit (SVC) signaling (point-to-point connections), SVC signaling (point-to- multipoint..
The PA-POS-10C3 is supported on a FlexWAN or Enhanced FlexWAN module used in the Cisco 7603 router, Cisco 7606 router, Cisco 7609 router, and Cisco 7613 router. The FlexWAN module can be installed in any slot of a Cisco 7600 series router except slot 1, which is reserved for the supervisor engine. Port adapters can be installed into either port adapter bay 0 or port adapter bay 1 on the FlexWAN module.Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: PA-POS-10C3
Brand Name: Cisco
Product Model: ..
Cisco Packet OC-3 Interface Processor for Cisco 7500 and 7000/RSP series routers, Cisco offers industry-leading broadband data interface bandwidth to support the most demanding applications across both local-area and wide-area networking environments. -Operating at 155 Mbps, the Packet OC-3 interface provides the highest available interface bandwidth for packet-based traffic and is completely compatible with SONET and Synchronous -Digital Hierarchy (SDH) -network facilities. By using standard packet protoco..
The extensible Cisco I-Flex design combines shared port adapter (SPA) enabling service prioritization for data, voice, and video services. Enterprise and service provider customers can take advantage of improved slot economics resulting from modular port adapters that are interchangeable across Cisco routing platforms. The I-Flex design maximizes connectivity options and offers superior service intelligence through programmable interface processors that deliver line-rate performance.MPLS-VPN support that ..
The Cisco 1 port OC48c/STM-16c POS/RPR Shared Port Adapter is available on high-end Cisco routing platforms and offers the benefits of network scalability with lower initial costs and easy upgrades. The 1 port OC48c/STM-16c POS/RPR Shared Port Adapter continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and leading-edge technology.Synchronization, Local (diagnostic) and line (network) loop back, Online insertion and removal (OIR), Field-r..
Single-mode Intermediate Reach Port AdapterThe PA-POS-OC3 interface provides a direct connection between the supported router or switch platform and external networks.Product Type: Port Adapter
Application/Usage: Data Networking
Interfaces/Ports: 1 x OC-3c/STM-1 WAN
Interfaces/Ports Details: 1 x SC Port OC-3c/STM-1 WAN
Compatibility: Cisco 7200 , Cisco 7500..
The PA-POS-OC3 interface provides a direct connection between the supported router or switch platform and external networksUse one duplex SC-type cable or two simplex SC-type cables, one for transmit (TX) and one for receive (RX).Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: PA-POS-OC3MM=
Brand Name: Cisco
Product Name: Multimode Port Adapter
Product Type: Port Adapter
Application/Usage: Data Networking
Interfaces/Ports: 1 x STS-3c/STM-1 WAN
Interfaces/Ports Details: 1 x SC Duplex STS-3c/SD..
This Module supports E1 G.703 unframed for utilizing the full 2.048 Mbps. The G.703 models can also be configured for framed mode where they support all the features of the other VWIC models. The 1-port E1 Multiflex VWIC connects 1 to 30 DS0 channels (voice calls) to the Digital T1/E1 Packet Voice Trunk Module.The E1 VWIC version include integrated DSU, The 1-port G703 VWIC can be configured as a standard E1 interface and therefore has all the features of the VWIC-1MFT-E1 when not in unframed G.703 mode, ..
The Cisco 1 and 2-port T1/E1 Multiflex Voice/WAN Interface Cards (Multiflex VWICs) support voice, and data applications in Cisco 2600 and 3600 multiservice routers. The Multiflex VWIC combines WAN Interface Card (WIC) and Voice Interface Card (VIC) functionality to provide unparalleled flexibility, versatility and investment protection from its many uses. Customers who choose to integrate voice and data in multiple steps preserve their investment in a T1/E1 WAN interface since the Multiflex VWIC can be reus..
The VWIC2-1MFT-T1/E1 1-Port Multi flex Trunk Interface Card supports data and voice applications on the Cisco 1721 (data only), 1751 and 1760 Modular Access Routers, the Cisco 2600XM Multi service Router, the Cisco 2691 Multi service Platform, the Cisco 3662 Telco Versatile DCN Access Platform, the Cisco 3725 and 3745 Multi service Routers, and the Cisco 1841 (data only), 2801, 2811, 2821, 2851, 3825, and 3845 Integrated Services Routers. The Cisco MFT VWIC2 combines WAN-interface-card (WIC) and voice-inter..