Each of the eight interfaces may be mapped to an individual DS0 or dynamically switched based on phone numbers in the dial plan Includes ring generatorSupports loop start, PLAR, and wink delay (for DNIS), Caller ID number supported with FSK (name also supported on PRI 5ESS circuit)Product Name: ATLAS 800 Series Octal FXS Module (for ATLAS 830 and 890)
Product Type: Expansion Module
Compatibility: ATLAS 830, ATLAS 890
Product Model: 1200338L1
Product Line: ATLAS
Application/Usage: Data Networking
Interfa..
The Quad T1/PRI module combines with other ATLAS components to implement a variety of WAN access products, including a T1 Bandwidth Manager, an ISDN Access Switch, and a Digital Access Cross-connect System (DACS). The module provides four network ports, each of which can be independently configured to operate in T1 (DS-1 or DSX-1) or Primary Rate ISDN (PRI) modes. The Quad T1/PRI module can perform T1- to-PRI conversion, translating between the robbed-bit signaling presented in a channelized T1 circuit and ..
Spare Main AC Power Supply for ATLAS 830. Includes power cord. Can be used to replace the power supply that ships with the base unit in the event of a failure...
The ATLAS 830 Integrated Access Device (IAD) is a multi-function, modular platform that provides voice, data, video, and Internet connectivity and WAN access to reduce overall telecommunication expenses. The ATLAS 830 is designed to be installed between the network service provider's circuit(s) and customer premises equipment enabling many network devices to share WAN access and bandwidth. This flexible and modular platform functions as a T1/T3/E1 bandwidth manager, ISDN PRI/BRI switch, Frame Relay switch, ..
The ATLAS 890 is the newest member of the ATLAS 800 Series product line and is a high-density, modular platform that provides complete system redundancy. With the ATLAS 890, voice, data, video, and Internet applications are all supported in a modular platform that includes both logic and power supply redundancy. The ATLAS 890 chassis includes a high-speed, multi-protocol backplane and modular expansion slots that support all the 800 Series option modules. The redundant DC version provides 15 slots. These ho..
Product Name: ATLAS 890 System Controller 10/100 Base-T Ethernet Port EIA-232
Product Type: Control Module
Compatibility: ATLAS 890 System Controller chassis
Product Model: 1200322L1
Application/Usage: Switching Network
Interfaces/Ports: 1 x 10/100Base-TX
Interfaces/Ports Details: 1 x RJ-45 10/100Base-TX Serial RS-232
Data Transfer Rate: 100 Mbps Ethernet
Interface Type: 10/100Base-TX
Number of Ports/Channels: 1..
ATLAS 800 Series option module. Provides 4 EIA-530 compliant interfaces, each
supporting Nx 56/64 kbps operation, up to 2.048 Mbps. Includes adapter cables
providing DB-25 interfaces for all 4 ports...
The Quad Nx 56/64 module combines with other ATLAS components to provide solutions for a variety of wide area networking applications. Providing four synchronous V.35 DTE ports, the Quad Nx 56/64 module serves as the interface for high speed routers and other DTE equipment to access the wide area network. Each port of the Quad Nx 56/64 module can be configured through soft-ware to operate at any multiple of 56 K or 64 Kbps, up to 2.048 Mbps. Using the ATLAS Channel Mapping Utility, a port can be mapped to o..
Provides interfaces that are independently configurable for DS-1, DSX-1, or PRI operation
Supports Drop/Insert and 1/0 Digital Cross-Connect (DACS) applications
Either T1 or PRI circuit can serve as timing source for system
Supports PRI switching applications
Supports Frame Relay applications
T1 ports provide additional bandwidth for T1 Inverse Multiplexing applications when used in conjuction with the NxT1 HSSI/V.35 or NxT1 HSSI module..