Cisco PA-MC-2T1 2-Port MultiChannel T1 Port Adapter
Key Features: Up to eight independent T1 ports per card, Channelized T1, fractional T1, full rate T1, and ISDN PRI supported, Internal or network clocking selectable on each port, Line and payload loopback capabilities, Full bit error rate testing capabilities on any T1, Alarm detection: alarm indication, Support for Frame Relay, Point-to-Point Protocol (PPP), HDLC, SMDS DXI, ISDN PRI, X.25 connections, Transmits and receives data bidirectionally at the rate of 1.536 Mbps for each T1 port T1/DSX1 version features: DS1 100-ohm interfaces with RJ-48c connectors, D4 (Super Frame [SF]) and Extended Superframe (ESF) framing, Alternate mark inversion (AMI) or binary 8-zero substitution (B8ZS) line encoding, Data rate to 1.536 Mbps for each T1 port, Internal and loop (recovered from network) clocking, Full FDL support and FDL performance monitoring, according to configurable standard: ANSI T1.403 or AT&T TR 54016, Selectable DSX-1 cable length in increments from 0 to 655 feet, Selectable DS1 CSU line build-out: 0, -7.5, -15, and -22.5 dB, Selectable DS1 CSU receiver gain: 26 or 36 dB, DS1 line protection per UL1459/1950, FCC part 68, Full support for DSX-1 Management Information Base (MIB, RFC 1406), including alarm detection and reporting, DSX-1 MIB remote access supported
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: PA-MC-2T1=
Brand Name: Cisco
Product Model: PA-MC-2T1
Product Name: Multichannel T1 Port Adapter
Product Type: Port Adapter
Application/Usage: Data Networking
Interfaces/Ports: 2 x T1 WAN
Interfaces/Ports Details: 2 x T1 Network WAN
Data Transfer Rate: 1.54 Mbps T1
Protocols: PPP
Protocols: HDLC
Protocols: X.25
Protocols: Frame Relay
Protocols: IP
Protocols: IPX
Status Indicators: Enabled LED, One status LED for each port
Compatibility: Cisco 7100, Cisco 7200, Cisco 7200VXR, Cisco 7500/VIP2
This Cisco PA-MC-2T1 2-Port MultiChannel T1 Port Adapter is in refurbished condition and is fully guaranteed by our 90-day warranty. Please feel free to contact us regarding our inventory of refurbished Cisco networking equipment, or if you have any additional questions regarding this PA-MC-2T1 2-Port MultiChannel T1 Port Adapter.
United States of America Shipping
Orders for this Cisco PA-MC-2T1 unit which qualify for Free Super-Saver Shipping are shipped at our discretion via the lowest cost method. We use FedEx, UPS, and US Postal Service as shipping carriers. We cannot ship this Cisco PA-MC-2T1 within the USA by billing directly to your shipper account number. All shipping charges must be pre-paid at checkout.
International / Foreign Shipping
Cisco PA-MC-2T1 2-Port MultiChannel T1 Port Adapter units which are shipped internationally have a mandatory 4-10 business day security holding period between payment being received and shipment processing. This security policy is to allow funds to fully clear our bank account. International transport costs can be charged directly to your FedEx or UPS account number. We cannot ship internationally using your TNT account number; however you can coordinate with TNT to have them pick up the shipment from our location.
Expedited and Rush Shipping
HardwareJet.com can usually provide expedited (1 or 2 day shipping) for Cisco products; however there is an additional rush fee per unique Cisco PA-MC-2T1 2-Port MultiChannel T1 Port Adapter unit in addition to the product cost and expedited carrier shipping charges. If we can offer expedited shipping for an item, expedited shipping costs will be shown at checkout. If we cannot provide expedited shipping for an item, then you will not be presented with these options during the cart checkout process.