Cisco WS-X5530-E3 Catalyst 5000, Supervisor Engine III with Net Flow Feature Card II (NFFC II)

The Supervisor Engine III hardware allows all three 1.2-Gbps backplanes in the Catalyst 5500 series switches to operate independently, providing 3.6-Gbps throughput (when traffic does not have to cross the backplane bus segments).

The Supervisor Engine III boots differently from the earlier supervisor engines. The Supervisor Engine III boot process uses two images: ROM monitor and Catalyst 5000 family supervisor engine software. The ROM monitor is the first software to run when the switch is powered up or reset. Based on how the ROM monitor has been configured, the switch either stays in ROM monitor mode or loads the supervisor engine software (refer to the Software Configuration Guide for your switch for detailed information about using ROM monitor mode).

Spare Product, R4700 RISC Processor, Max. VLANs: 1024, NetFlow Feature Card II (NFFC II), FE Management Interface, Default DRAM: 64 MB

Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: WS-X5530-E3=
Brand Name: Cisco
Product Model: WS-X5530-E3
Product Name: Supervisor Engine III
Product Type: Supervisor Engine
Application/Usage: Data Networking
Interfaces/Ports Details: 1 x Console Management
Interfaces/Ports Details: 1 x Auxiliary Management
Data Transfer Rate: 3.60 Gbps Gigabit Ethernet
Expansion Slots: 1 x PCMCIA Occupied
Dimensions: 1.2" Height x 14.4" Width x 16.0" Depth
Compatibility: Catalyst 5500 Series Switches