Your shopping cart is empty!
Your shopping cart is empty!
Product Name: Stacking Cable Product Type: Data Transfer Cable Cable Length: 9.84 ft Connector on First End: SFP3 Meter cable with integrated SFPs on each end. Allows adjacent NetVanta switches to be interconnected. Support 1 or 2.5Gbps. For use with NetVanta 1200 and 1500 Series Switches...
The Small Form-Factor Pluggable 10 Gigabit Single-Mode Limiting SFP+ (SFP+) optical transceiver is a fully duplex serial electric, serial optical device with both transmit and receive functions contained in a single module that provides a high speed serial link at 10 Gbs. Installed into an appropriate host module, the SFP+ provides a 10 Gigabit interface to the supporting system.Product Name: SFP+ 10G 1310NM SMF 10KM Product Type: SFP+ Green Compliant: Yes Green Compliance Certificate/Authority: RoHS, WEE..
The Small Form-Factor Pluggable 10 Gigabit Multi-Mode Limiting SFP+ (MMF SFP+) optical transceiver is a fully duplex serial electric, serial optical device with both transmit and receive functions contained in a single module that provides a high speed serial link at 10 Gbs. Installed into an appropriate host module, the MMF SFP+ provides a 10 Gigabit interface to the supporting system.Product Name: SFP+ 10G MMF Product Type: SFP+ Green Compliant: Yes Green Compliance Certificate/Authority: RoHS, WEEE Com..
This 1U high rackmount two-line by 16-character LCD display features menu buttons and keypad access dial/test/configuration control menus of rackmount circuit units. The RM configurator mounts above the Smart 16/16e shelf and plugs into the front of the controller card...
The span power and protection chassis provides a shelf in which to mount the SPPM module...
The spam power and protection module provides all of the functions of the ESPM but also provides for span powering of DS1 facilities for NIU powering...
Spare AC power supply for NetVanta 1638 (4700568F1)...
Spare AC power supply for NetVanta 1638P (4700569F1)...
The OC-48 Small Form-Factor Short-Reach Pluggable (SFP48S) plugs into ADTRAN OC-48 modules designed to accept Small Form-Factor pluggables. Installed into an appropriate host module, the SFP48S provides an OC-48 interface to the supporting system...
The NetVanta Dual Stacking XIM provides high-speed connectivity between ADTRAN NetVanta 1600 Series of Gigabit Ethernet Switches.Product Name: NV1600 Dual Stacking Module Product Type: Stacking Module Green Compliant: Yes Green Compliance Certificate/Authority: RoHS Compatibility: Adtran NetVanta 1600 Series Gigabit Ethernet Switches Product Model: 1700470F1 Application/Usage: Stacking Data Transfer Rate: 20 Gbps Gigabit Ethernet Bi-directional..
The ADTRAN DSU III AR is a technologically advanced, high performance data service unit/channel service unit (DSU/CSU). This unit provides a reliable interface between the digital data service (DDS) or 4-wire Switched 56 (SW56) network and the customer's data terminal equipment (DTE). The unit is an all-rate DSU/CSU supporting synchronous and asynchronous data rates on the primary channel and asynchronous data rates on the secondary channel. The synchronous primary channel rates supported are 2.4, 4.8, 9.6,..
AdTran T1 CSU ACE 1202022L1 (1202.022L1). The T1 CSU ACE provides T1 line-conditioning and jitter tolerance per ANSI T1.403, T1.102 and AT&T TR 62411. This unit is typically used for voice line conditioning on a PBX. This unit uses 48V DC power.Specifications:T1 line-conditioning and jitter tolerance per ANSI T1.403, T1.102 and AT&T TR 62411 Supports framed (B8ZS or AMI) or unframed signal formats Transmits unframed "all 1s" during signal loss from DTE or T1 network Bantam test jacks Front panel st..
The unit is designed to provide alarms, loopbacks, signal regeneration, line build out, and surge protection. The unit is suitable for wallmounting or desktop use. Five LEDs on the front of the unit (power, sync, network LOS, network Manual and remote LB, EQ LOS, EQ manual and remote LB) display the status of the unit. On the back of the unit an eight position dip switch provides settings for customer premises equipment and network line build out (LBO) distances, as well as manual loopback operation.Produ..
