Your shopping cart is empty!
Your shopping cart is empty!
Key Features: Channelized T1, fractional T1, full rate T1, and ISDN PRI supported. Internal or network clocking selectable on each port. Line and payload loopback capabilities. Full bit error rate testing capabilities on any T1. Alarm detection: alarm indication. Support for Frame Relay, Point-to-Point Protocol (PPP), HDLC, SMDS DXI, ISDN PRI, X.25 connections T1/DSX1 version features:. D4 (Super Frame [SF]) and Extended Superframe (ESF) framing. Alternate mark inversion (AMI) or binary 8-zero substitution ..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: BC-UAI-4-155-MMF= Brand Name: Cisco Product Model: BC-UAI-4-155-MMF Product Name: 4-port Multimode Fiber Back Card Product Type: Service Module Application/Usage: Data Networking Connectivity Media: Multi-mode Fiber Data Transfer Rate: 155 Mbps..
The Cisco 4-Port OC-12/STM-4 ATM ISE Multimode Line Card expand the connectivity options for Cisco 12000 Series routers, enabling service providers to attach Cisco 12000 routers directly to existing ATM infrastructures.Online insertion and removal (OIR), enabling insertion and removal of line cards without impacting traffic, Route Processor Redundancy Plus (RPR+), Nonstop forwarding (NSF) and stateful switchover (SSO)Manufacturer: Cisco Systems, Inc Manufacturer Part Number: 4OC12X/ATM-MM-SC Brand Name:..
The 4-Port OC-12/STM-4 POS/SDH Line Card offers industry leading switching performance and class-of-service (CoS) features for delivering advanced end-to-end networking features. It allows service providers to offer differentiated services with deterministic traffic behavior in the core of the network. The unique combination of features provides a versatile solution allowing a service provider to deploy a single interface in either a core application or a high-capacity aggregation application. This level of..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: SFP-4-622= Brand Name: Cisco Product Model: SFP-4-622 Product Name: 4-Port OC-12/STM-4 Single-Height Back Card Product Type: Interface Module Application/Usage: Data Networking Interfaces/Ports: 4 x OC-12/STM-4 Interfaces/Ports Details: 4 x OC-12/STM-4 Connectivity Media: Single-mode Fiber Data Transfer Rate: 622 Mbps OC-12/STM-4 Compatibility: Cisco MGX 8800 Series Switches..
The OC-12c/STM-4 POS Optical Services Module provides high-capacity, high-density connections along service provider distribution layer routers and to core routers. In addition to high-touch IP service delivery at OC-12 speeds, four Gigabit Ethernet interfaces on the same module offer additional connectivity. This line card uniquely enables service providers to scale network bandwidth and performance while offering a wide range of IP services that may be applied without performance degradation...
The Cisco 4-Port OC-12c/STM-4 POS Shared Port Adapter is available on high-end Cisco Systems routing platforms offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco 4-Port OC-12c/STM-4 POS Shared Port Adapter continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco 4-Port OC-12c/STM-4 POS Shared Port Adapter allows different interfaces (Packet over SONET/SDH [PO..
The Cisco OC-3c/STM-1c ATM Line Card expands the connectivity options for the Cisco 12000 series Internet routers so that service providers can attach the Cisco 12000 series router directly to their existing ATM infrastructure. This allows Internet service providers (ISPs) to offer wire speed Internet access via ATM virtual circuits (VCs).Wavelength: 1300-nm, Committed Access Rate (CAR), Access control lists (ACLs) and extended access control lists (EACLs), Maximum transfer unit (MTU) of 9188 bytes, Hardw..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: BPXSMF1554RBC Brand Name: Cisco Product Model: BPXSMF1554RBC Product Name: 4-Port OC-3 APS Redundant Back Card Product Type: Service Module Application/Usage: Data Networking Interfaces/Ports: 4 x OC-3/STM-1 Interfaces/Ports Details: 4 x OC-3/STM-1 Connectivity Media: Single-mode Fiber OC-3/STM-1 Data Transfer Rate: 155.52 Mbps OC-3/STM-1 Compatibility: Cisco BPX 8600 Series Multiservice Switches..
The Cisco BPX 8600 Series Multiservice switches provide a scalable set of solutions to cost-effectively deliver ATM, Frame Relay, voice, circuit emulation and IP services in medium sized PoPs or small COs.The Cisco BPX 8600 Series is comprised of the Cisco BPX 8620 for broadband ATM services, the BPX 8650 Multiservice switch which supports broadband and MPLS for IP services, and the BPX 8680 Universal Service Node which offers broadband, narrowband and MPLS services.Manufacturer: Cisco Systems, Inc Man..
Spare Product, 16K cons, 128k/256k cell buff, Use with Broadband Switch Module (BXM)Manufacturer: Cisco Systems, Inc Manufacturer Part Number: BPX-BXM-155-4D= Brand Name: Cisco Product Model: BPX-BXM-155-4D Product Name: 4-port OC-3/STM-1 Expansion Module Product Type: Expansion Module Application/Usage: Data Networking Interfaces/Ports: 4 x OC-3/STM-1 Interfaces/Ports Details: 4 x Port OC-3/STM-1 Connectivity Media: Fiber OC-3/STM-1 Data Transfer Rate: 155 Mbps OC-3/STM-1 Compatibility: Cisco BPX 8600 Se..
The Cisco 7304 OC-3c/STM-1 Packet over SONET /SDH Line Card in four ports, is a modular, versatile card suited for a variety of solutions: from WAN uplinks in a CPE deployment to aggregation at the edge where service provider and enterprise networks meet. Using the Cisco Network Services Engine (NSE)-100 Route Processor on the Cisco 7304 Router, this line card can use multiprotocol capability from Cisco IOS Software, and PXF technology to deliver hardware-accelerated IP network services.Manufacturer: Cisc..
The 4-Port OC-3c/STM-1 POS (Packet over SONET) SPA is available on high-end Cisco Systems routing platforms offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco SPA/SIP portfolio continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows deployment of different interfaces (Packet over SONET/SDH [POS], ATM, Ethernet, and so on) on the same..
The Cisco 4-Port OC-3 POS SPA is available on high-end Cisco Systems routing platforms offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco SPA/SIP portfolio continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows deployment of different interfaces (packet over SONET/SDH [POS], ATM, Ethernet, etc.) on the same interface processor.Fie..
The 4-port OC-48c/STM-16c POS Line Card deliver high-performance, powerful features and a full range of interface types, speeds, and connectors, enabling deployment of high-speed core, peering, and edge applications. The 4-port OC-48c/STM-16c POS Line Cards provide the ideal solution to meet and exceed the ever-growing demands for higher capacity and service availability.LR optics, Forwarding Engine 4+, Line-rate throughput for IP forwarding and MPLS switching, Performance sustained in fully loaded system..
The Cisco 4-Port OC-48c/STM-16c POS/RPR SPA is available on high-end Cisco routing platforms and offers the benefits of network scalability with lower initial costs and easy upgrades. The SPA continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and leading-edge technology. The SPA allow different interfaces (POS, ATM, etc.) to be deployed on the same carrier card.Protocols: High-Level Data Link Control (HDLC), Point-to-Point Protocol (PPP)..
The Cisco IP Services Engine (ISE) ATM line card provide the same powerful feature set as the standard ATM line cards and go a step further to accommodate service provider requirements by combining an extensive set of service-enabling edge features with advanced ATM traffic management and sophisticated IP/Multiprotocol Label Switching (MPLS)-to-ATM quality-of-service (QoS) functions, without compromising line-rate performance.Spare product, Route memory: 512 MB, Packet memory: 512 MB, Up to 3.4-Mpps aggre..
