Your shopping cart is empty!
Your shopping cart is empty!
For use with Cisco Aironet 1250 Series Access Points -- Does not include standard AC power cable.The power injector for Cisco Aironet 1250 Series Access Points (AIR-PWRINJ4) contains an integrated power supply that converts 100 to 240 volts AC into 56 volts DC and then injects this power onto the Category 5 Ethernet cable to power the access point. Cisco inline-powered WLAN devices and their usage requirements with a Cisco inline-powered switch, mid-span device, or injector-powered solution.With the secur..
Aironet RM1252A Radio Module is compatible with Aironet 1250 Series Access Point. A single radio provides optimum performance with approximately 300 Mbps maximum PHY data rate. Customers who deploy dual-band, 802.11n radios and power the 1250 Series using standard 802.3af will have more reliable and predictable coverage than that provided by traditional 802.11a/g networks; however, operation will be limited to a single transmitter per radio with maximum PHY data rates of 150 Mbps instead of 300 Mbps per rad..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: AIR-RM1252A-E-K9= Brand Name: Cisco Product Line: Aironet Product Model: RM1252A Product Name: Aironet RM1252A Radio Module Product Type: Wireless Module Wi-Fi: Yes Wi-Fi Standard: IEEE 802.11n Antenna Connector: RP-TNC UNII Band: Yes UNII Maximum Frequency: 5 GHz Wireless Transmission Speed: 54 Mbps Additional Information: 3 x antenna connectors Device Supported: Access Point Compatibility: Cisco Aironet 1250 Series Access Point..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: AIR-RM1252G-E-K9= Brand Name: Cisco Product Line: Aironet Product Model: RM1252G Product Name: Aironet RM1252G Radio Module Product Type: Wireless Module Wi-Fi: Yes Wi-Fi Standard: IEEE 802.11n Antenna Connector: RP-TNC ISM Band: Yes ISM Maximum Frequency: 2.40 GHz Wireless Transmission Speed: 54 Mbps Additional Information: 3 x antenna connectors Device Supported: Access Point Compatibility: Cisco Aironet 1250 Series Access Point..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: AIR-RM1252G-A-K9 Brand Name: Cisco Product Line: Aironet Product Model: RM1252G Product Name: Aironet RM1252G Wireless Module Product Type: Wireless Module Wi-Fi: Yes Wi-Fi Standard: IEEE 802.11n Number of Antennas: 3 Antenna Connector: RP-TNC ISM Band: Yes ISM Minimum Frequency: 2.40 GHz Device Supported: Access Point Compatibility: Cisco Aironet 1250 Series Access Points: AIR-AP1252AG-x-K9, AIR-LAP1252AG-x-K9, AIR-AP1252G-x-K9, AIR-LAP1252G-x-K9..
The antenna operates in the 2.4-GHz frequency range and is designed for use in bridging environments. The antenna is designed to be used outdoors and can be mounted on 1.5 in. (3.8 cm) to 2.5 in. (6.3 cm) diameter masts.All range estimations are based on use of a BR 1310 access point and the same type of antenna at each end of the connection under ideal outdoor conditions. The distances referenced here are approximations and should be used for estimation purposes only. Application: Outdoor long range poin..
This antenna is designed for use with Cisco access points having dual-band antenna ports. These include the AP1600, AP2600, AP3600, and AP3700 series access points. The antenna is intended solely for indoor deployments.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: AIR-ANT2535SDW-R= Brand Name: Cisco Product Line: Aironet Product Name: Aironet Short Dual-Band Omni Antenna Product Type: AntennaTechnical InformationDirectivity: Omni-directional Frequency Band Type: VHF UHF Frequency: 2.40 GH..
Product Name: 2.4 GHZ 2.2 Dbi Short White-Dipole Antenna Quantity. 1 Product Type: Antenna Antenna Gain: 2.5 dBi USB: No Directivity: Omni-directional Frequency Band Type: UHF Diameter: 0.7" Height: 1.7" Connector Type: RP-TNC Form Factor: Pole Frequency: 2.40 GHz to 2.50 GHz Product Line: Aironet Application/Usage: Wireless Data Network Number of Connectors: 1 Compatibility: Cisco Aironet 3500 Series Wireless Access Point Polarization: Linear Product Family: Aironet..
High gain outdoor directional antenna with RP-TNC-This WLAN antenna is a completely enclosed 16 element yagi. It is designed to be used as a bridge antenna between two networks or for point-to-point communications. It has a nominal VSWR of 1.5:1 and is less than 2:1 over the entire frequency band. The gain is 13.5 dBi and the half-power beamwidth is 30 degrees. This antenna is normally mounted on a mast and is vertically polarized...
IR-ANT2410Y-R 10-dBi Yagi antenna and provides instructions for mounting it. The antenna operates in the 2.4- to 2.48-GHz frequency range and is designed for use as an access point or bridge antenna. The antenna is an enclosed 6-element, vertically polarized directional Yagi and is designed to be mounted indoors or outdoors on a mast or flat vertical surface.Product Type: Antenna Maximum Antenna Range: 548 ft Frequency Band Type: UHF Frequency: 2.40 GHz to 2.48 GHz Antenna Gain: 10 dB Connector Type: RP-T..
The Cisco NM-AIC-64 Alarm Interface Controller Network module expands the capabilities of the Cisco Data Communications Network solution (DCN) by providing remote alarm monitoring and remote control of network elements. By installing this network module into the Cisco 26xx, 3640, or 3660 Series routers, Network Managers have the capability of monitoring and remotely controlling equipment in unmanned sites to provide enhanced Network Operations through added visibility into Network Elements, thereby increasi..
