Your shopping cart is empty!
Your shopping cart is empty!
Cisco Dual-Port 100BASE-FX MMF Fast Etherchannel 100BaseFX-MMF modular uplink for Supervisor Engine III E1/E2/E3/E2A/E3A...
Cisco Systems provides Token Ring and Fast Ethernet inter-VLAN bridging and routing capabilities with the Dual-Port Token Ring ISL Port Adapter PA-2FEISL-FX. The PA-2FEISL enables network administrators to bridge and route multiple VLANs of Token Ring and Ethernet traffic over the same high-speed backbone trunks. The two-port Token Ring ISL fiber and copper port adapters deliver Fast Ethernet with ISL VLAN transport over switch-to-switch backbone connections or switch-to-server data-center attachments, but ..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: WS-X2922-XL Brand Name: Cisco Product Model: WS-X2922-XL Product Name: 2-Port 100BaseFX Switching Module Product Type: Switching Module Application/Usage: Switching Network Interfaces/Ports: 2 x 100Base-FX Interfaces/Ports Details: 2 x 100Base-FX Connectivity Media: Fiber 100Base-FX Data Transfer Rate: 100 Mbps Fast Ethernet Management: IEEE 802.1q VLAN, ISL Compatibility: Catalyst 2900 XL Series Switches..
The Cisco WS-X2922-XL-V is a two port 100BASE-FX switch module for Catalyst 2924 switches...
The 10GE interface card (part numbers IPS-2X10GE-SR-INT and IPS-2X10GE-SR-INT=) provides two 10000 Base-SX (fiber) interfaces. The IPS-4260 supports one 10GE interface card for a total of two 10GE fiber interfaces. The IPS 4270-20 supports up to two 10GE interface cards for a total of four 10GE fiber interfaces. The card ports require a multi-mode fiber cable with an LC connector to connect to the SX interface of IPS-4260 and IPS 4270-20. The 10GE interface card does not support hardware bypass.Product Ty..
Multiflex trunk interface card support generic 2-port T1 or E1 trunk interfaces for voice, data, and integrated voice and data applications. This card provide basic structured and unstructured service for T1 or E1 networks. Supporting unstructured E1 (G.703) applications. To simplify remote management, the G.703 version includes a fully managed DSU.Enhanced clocking capabilities, Unstructured E1/G.703 Support, Data Support WIC Mode, Voice Support VIC Mode, Drop-and-Insert MultiplexingProduct Name: 2-Por..
The Third-generation 1- and 2-port G.703 Multiflex Trunk voice/WAN Interface Cards (product numbers VWIC3-1MFT-G703 and VWIC3-2MFT-G703) support not only unstructured E1 (G.703) but also all the features of the other Cisco MFT VWIC3 cards, including drop and insert. Additional flexibility is provided on the 2 port G.703 Multiflex Trunk voice/WAN Interface Cards with the capability to configure one port for unstructured E1 (G.703) while configuring the other for standard framed E1.Manufacturer: Cisco Syste..
These flexible interface cards support multiple integrated data, voice and video applications, facilitating the migration from data only as well as circuit-switched voice/video services to a packet voice/video solutionProduct Name: VWIC3-2MFT-T1/E1= 2 Port 3rd Gen Multiflex Trunk Voice/WAN Interface T1/E1 Product Type: WAN Module Compatibility: Cisco 1900 Series Router Chassis, Cisco 2900 Series Router Chassis, Cisco 3900 Series Router Chassis Product Model: VWIC3-2MFT-T1/E1 Dimensions: 0.8" Height x 3.1"..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: 800-IL-PM-2 Brand Name: Cisco Product Name: 2 Port Power over Ethernet Injector Product Type: PoE Injector Output Voltage: 48 V DC Output Ports: 2 x RJ-45..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: ATUC2CAPDIR2 Brand Name: Cisco Product Model: ATUC2CAPDIR2 Product Name: 2-Port ADSL Line Card Product Type: Service Module Application/Usage: Data Networking Interfaces/Ports: 2 x ADSL Interfaces/Ports Details: 2 x RJ-45 ADSL Data Transfer Rate: 8 Mbps ADSL Compatibility: Cisco 6100 IP DSL Switches..
This 2-port asynchronous/ synchronous serial WAN Interface Card supports two low-speed serial interfaces at speeds up to 128kbps. This WAN interface card supports asynchronous and synchronous traffic, and plugs directly into a WAN Interface Card (WIC) expansion slot.Modular Router Solutions: LAN-to-LAN Routing, Serial & Legacy Concentration, VPN & Firewall Solutions Comments:, For use in a Cisco 2600 series and 3600 series with the NM-1FE2W, NM-2FE2W, NM-1FE1R2W and NM-2W or a Cisco 1720Product Name: 2-..
ISDN Voice Interface Cards (VICs) connect directly to Public Switched Telephone Networks (PSTNs), Private Branch Exchanges (PBX), and Private Access Branch Exchanges (PABX), supporting both on-premise and off-premise connections.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: VIC-2BRI-NT/TE= Brand Name: Cisco Product Name: 2-Port BRI Voice/Fax Interface Card Product Type: Voice Interface Card (VIC) Application/Usage: Voice Interfaces/Ports: 2 x ISDN BRI WAN Interfaces/Ports Details: 2 x RJ-45 I..
The 2-port channelized E1/ISDN network module supports two channelized E1/ISDN PRI balanced (120-ohm) connections via DB-15 connectors.ISDN Concentration, LAN-to-LAN Routing, Serial & Legacy Concentration, VPN & Firewall Solutions, Balanced (120-ohm) connectionManufacturer: Cisco Systems, Inc Manufacturer Part Number: NM-2CE1B= Brand Name: Cisco Product Model: NM-2CE1B Product Name: 2-Port Channelized E1/ISDN-PRI Balanced Network Module Product Type: Network Module Application/Usage: Data Networking Int..
The Cisco's 2-port Channelized E1/ISDN-PRI Unbalanced Network Module supports two channelized E1/ISDN PRI unbalanced (75-ohm) connections via DB-15 connectors.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: NM-2CE1U Brand Name: Cisco Product Name: 2-port Channelized E1/ISDN-PRI Unbalanced Network Module Product Type: Network Module Application/Usage: Data Networking Interfaces/Ports: 2 x Channelized E1/ISDN-PRI Interfaces/Ports Details: 2 x DB-15 Channelized E1/ISDN-PRI Connectivity Media: 75-..
The Cisco E1/T1 ISDN PRI Network Module's integrated channel service unit (CSU) provides direct connection to the Telecommunications network, thus allowing customers to consolidate customer premises equipment (CPE). This provides multifunction dial access aggregation, routing functionality, VPN and firewall security, and other capabilities right inside the Cisco router in power branch office environments. Both the 1-port and 2-port versions offer support for balanced and unbalanced E1 connectivity and confo..
The Cisco 2-Port Channelized E1/T1/ISDN-PRI HWIC combine multiple T1/E1 WAN connectivity- Channelized T1/E1 and ISDN Primary Rate Interface (PRI), in the same card. Applications include fractional or full T1/E1 WAN connectivity, ISDN PRI for primary WAN link or WAN backup, and dial access aggregation.Integrated CSU/DSU per port, Fractional T1/E1 (n x DS-0) or full T1/E1, Balanced or unbalanced E1 termination in the same module, E1 unframed and framed modes (G.703 or G.704)Product Name: 2 Port Channelize..
