Your shopping cart is empty!
Your shopping cart is empty!
This Cisco 2-port Multichannel Enhanced Capability Port Adapter (PA-MC-2T3-EC) for the Cisco 7200 Series Routers and Cisco 7301 Router is enhanced version of the earlier multichannel T3 port adapters. This new port adapter address specific scalability challenges by increasing performance and lowering CPU utilization. It offload advanced capabilities and features from the CPU, delivering them directly to meet enterprise and service provider WAN link-aggregation service requirements. Each T3 interface can be ..
Key Features: Up to eight independent T1 ports per card, Channelized T1, fractional T1, full rate T1, and ISDN PRI supported, Internal or network clocking selectable on each port, Line and payload loopback capabilities, Full bit error rate testing capabilities on any T1, Alarm detection: alarm indication, Support for Frame Relay, Point-to-Point Protocol (PPP), HDLC, SMDS DXI, ISDN PRI, X.25 connections, Transmits and receives data bidirectionally at the rate of 1.536 Mbps for each T1 port T1/DSX1 version fe..
Cisco Fourth-Generation Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module - Expansion module - T1/E1 x 2 - T-1/E-1 - for Cisco 4451-XThe Cisco Fourth-Generation T1/E1 Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X integrated services routers. These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unpara..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: BPXSMF6222RBC Brand Name: Cisco Product Model: BPXSMF6222RBC Product Name: 2-Port OC-12 APS Redundant Back Card Product Type: Service Module Application/Usage: Data Networking Interfaces/Ports: 2 x OC-12/STM-4 Interfaces/Ports Details: 2 x OC-12/STM-4 Connectivity Media: Single-mode Fiber OC-12/STM-4 Data Transfer Rate: 622.08 Mbps OC-12/STM-4 Compatibility: Cisco BPX 8600 Series Multiservice Switches..
The 2-Port OC-12 Packet-over-SONET (POS) backcard for the Cisco MGX 8800/8900 Series Route Processor Module (RPM) XF is designed for use with the Cisco MGX 8800 and MGX 8900 Series wide-area edge switches. These backcard is for use with the Cisco MGX 8800/8900 Series MGX-RPM-XF-512 to provide up to OC-24 of bandwidth for IP services in the new world of data networking.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: MGX-2OC12POS Brand Name: Cisco Product Model: MGX-2OC12POS Product Name: 2-port ..
The OC-12c/STM-4 POS/SDH Line Card is a versatile, high-performance line card well suited for a variety of applications including high-speed WAN uplinks in a CPE deployment, high-speed enterprise backbone, and high-speed uplink for Cisco 7300 deployment as a medium density, medium speed edge-aggregation router in tier 2 and 3 service provider POPs.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: 7300-2OC12POS-SMI= Brand Name: Cisco Product Name: 2-port OC-12c/STM-4 Packet over SONET/SDH Product ..
The Cisco 2-Port OC-12c/STM-4 POS Shared Prot Adapter is available on high-end Cisco Systems routing platforms offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco 2-Port OC-12c/STM-4 POS Shared Prot Adapter continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco 2-Port OC-12c/STM-4 POS Shared Prot Adapter allows different interfaces (Packet over SONET/SDH [PO..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: NLC2OC3SM Brand Name: Cisco Product Model: NLC2OC3SM Product Name: 2-Port OC-3/STM-1 Node Line Card Product Type: Service Module Application/Usage: Data Networking Interfaces/Ports: 2 x OC-3/STM-1 Interfaces/Ports Details: 2 x SC OC-3/STM-1 Connectivity Media: Single-mode Fiber OC-3/STM-1 Data Transfer Rate: 155.52 Mbps OC-3/STM-1 Additional Information: Wavelength: 1261 nm to 1360 nm Compatibility: Cisco 6400 Series Broadband Aggregators..
This ATM SPA provide cost-effective wide-area networking (WAN) connectivity for service providers across their existing ATM networks. Using a highly modular approach, the SPA and SIP form factors maximize the flexibility of an existing Cisco 7600 series router, allowing service providers to mix and match SPAs to more easily meet evolving port-density and networking media needs.Product Type: Shared Port Adapter Application/Usage: Data Networking Expansion Slots: 2 x SFP Free Compatibility: Cisco 7600 SIP-2..
The Cisco OC-3c/STM-1 POS/SDH Line Card in two ports, is a modular, versatile card suited for a variety of solutions, from WAN uplinks in a CPE deployment to aggregation at the edge where service provider and enterprise networks meet. Using the Cisco Network Services Engine (NSE)-100 Route Processor on the Cisco 7304 Router, this line card can use multiprotocol capability from Cisco IOS Software, and PXF technology to deliver hardware-accelerated IP network services.Spare Product, SONET/SDH Framing, SONET..
The Cisco OC-3c/STM-1 POS/SDH Line Card in two ports, is a modular, versatile card suited for a variety of solutions, from WAN uplinks in a CPE deployment to aggregation at the edge where service provider and enterprise networks meet. Using the Cisco Network Services Engine (NSE)-100 Route Processor on the Cisco 7304 Router, this line card can use multiprotocol capability from Cisco IOS Software, and PXF technology to deliver hardware-accelerated IP network services.Spare Product, SONET/SDH Framing, SONET..
The Cisco 2-Port OC-3c/STM-1c POS Shared Port Adapter is available on high-end Cisco routing platforms, offering the benefits of network scalability with lower initial costs and easy upgrades. The Cisco SPA/SIP portfolio continues Cisco's focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows deployment of different interfaces (packet over SONET/SDH [POS], ATM, Ethernet, etc.) on the same interface pro..
OSM-2OC48/1DPT-SL is a POS/DPT Optical Service Module with LC fiber connectors for use with SMF. This module also contains 4 Gigabit Ethernet ports which requires GBICs.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: OSM-2OC48/1DPT-SL= Brand Name: Cisco Product Name: 2-port OC-48/STM-16 POS/DPT Optical Service Module Product Type: Fiber Module Application/Usage: Optical Network Interfaces/Ports: 2 x OC-48/STM-16 Interfaces/Ports Details: 2 x LC Duplex OC-48/STM-16 Connectivity Media: Single-mod..
The Cisco 2-Port OC-48c/STM-16c POS/RPR SPA is available on high-end Cisco routing platforms and offers the benefits of network scalability with lower initial costs and easy upgrades. The SPA continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and leading-edge technology. The SPA allow different interfaces (POS, ATM, etc.) to be deployed on the same carrier card.This SPA comply with the IEEE 802.17 RPR standard and also support the Spati..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: 15305-S1.1-2-LC= Brand Name: Cisco Product Name: 2-Port Optical Service Module Product Type: Optical Services Module Application/Usage: Optical Network Interfaces/Ports: 2 x STM-1 Interfaces/Ports Details: 2 x LC STM-1 Additional Information: Spare Product, Source type: Laser diode, Wavelength: 1261-1360 nm Compatibility: Cisco ONS 15305 Multiservice Aggregation for Metro Access..
