Your shopping cart is empty!
Your shopping cart is empty!
ISDN Voice Interface Cards (VICs) connect directly to Public Switched Telephone Networks (PSTNs), Private Branch Exchanges (PBX), and Private Access Branch Exchanges (PABX), supporting both on-premise and off-premise connections.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: VIC-2BRI-NT/TE= Brand Name: Cisco Product Name: 2-Port BRI Voice/Fax Interface Card Product Type: Voice Interface Card (VIC) Application/Usage: Voice Interfaces/Ports: 2 x ISDN BRI WAN Interfaces/Ports Details: 2 x RJ-45 I..
The 2-port channelized E1/ISDN network module supports two channelized E1/ISDN PRI balanced (120-ohm) connections via DB-15 connectors.ISDN Concentration, LAN-to-LAN Routing, Serial & Legacy Concentration, VPN & Firewall Solutions, Balanced (120-ohm) connectionManufacturer: Cisco Systems, Inc Manufacturer Part Number: NM-2CE1B= Brand Name: Cisco Product Model: NM-2CE1B Product Name: 2-Port Channelized E1/ISDN-PRI Balanced Network Module Product Type: Network Module Application/Usage: Data Networking Int..
The Cisco's 2-port Channelized E1/ISDN-PRI Unbalanced Network Module supports two channelized E1/ISDN PRI unbalanced (75-ohm) connections via DB-15 connectors.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: NM-2CE1U Brand Name: Cisco Product Name: 2-port Channelized E1/ISDN-PRI Unbalanced Network Module Product Type: Network Module Application/Usage: Data Networking Interfaces/Ports: 2 x Channelized E1/ISDN-PRI Interfaces/Ports Details: 2 x DB-15 Channelized E1/ISDN-PRI Connectivity Media: 75-..
The Cisco E1/T1 ISDN PRI Network Module's integrated channel service unit (CSU) provides direct connection to the Telecommunications network, thus allowing customers to consolidate customer premises equipment (CPE). This provides multifunction dial access aggregation, routing functionality, VPN and firewall security, and other capabilities right inside the Cisco router in power branch office environments. Both the 1-port and 2-port versions offer support for balanced and unbalanced E1 connectivity and confo..
The Cisco 2-Port Channelized E1/T1/ISDN-PRI HWIC combine multiple T1/E1 WAN connectivity- Channelized T1/E1 and ISDN Primary Rate Interface (PRI), in the same card. Applications include fractional or full T1/E1 WAN connectivity, ISDN PRI for primary WAN link or WAN backup, and dial access aggregation.Integrated CSU/DSU per port, Fractional T1/E1 (n x DS-0) or full T1/E1, Balanced or unbalanced E1 termination in the same module, E1 unframed and framed modes (G.703 or G.704)Product Name: 2 Port Channelize..
This is a 2 Port Channelized T1/ISDN-PRI Module, with integrated CSU, for Cisco 3600 and 2600 series (takes one router slot)...
The Cisco I-Flex approach combines shared port adapters (SPAs) providing an extensible design that enables service prioritization for data, voice, and video services. Enterprise and service provider customers can take advantage of improved slot economics resulting from modular port adapters that are interchangeable across Cisco routing platforms.High-Level Data Link Control (HDLC), Point-to-Point Protocol (PPP), Frame Relay, MLPPP, MLFRManufacturer: Cisco Systems, Inc Manufacturer Part Number: SPA-2XCT3..
The combination of channelized and clear channel T3 functions makes the Cisco 2-Port Channelized T3 SPA ideal for today's rapidly changing WAN environment. As an integral part of a service node where customer bandwidth needs are uncertain, the Cisco Channelized T3 SPA allows service providers to avoid determining beforehand how ports will be allocated between DS0, DS1, and DS3 connections. For enterprise remote-site connection, the flexibility to support DS0, DS1, and DS3 connections means this SPA reduces ..
The Cisco 2-Port Clear Channel T3/E3 Shared Port Adapter combines shared port adapters (SPAs) and SPA interface processors (SIPs), leveraging an extensible design that enables service prioritization for voice, video and data services. Enterprise and service provider customers can take advantage of improved slot economics resulting from modular port adapters that are interchangeable across Cisco routing platforms. The 2-Port Clear Channel T3/E3 Shared Port Adapter design maximizes connectivity options and of..
Two-port DID (Direct Inward Dial) voice/fax interface card Spare Direct Inward Dialing (DID) is a service offered by telephone companies that enables callers to dial directly an extension on a PBX or packet voice system (for example, Cisco CallManager and Cisco IOS® routers and gateways) without the assistance of an operator or automated call attendant. This service makes use of DID trunks, which forward only the last three to five digits of a phone number to the PBX, router, or gateway. For example, a comp..
The two-port E&M voice interface card for Cisco voice/fax network modules is used to connect to PBX or key system trunk lines. This voice interface card works with existing phone and fax equipment to provide voice and fax services over IP, and is compatible with H.323 standard for audio and videoconferencing.Voice & Fax Integration, VPN & Firewall Solutions, Supports 2- and 4-wire interfaces, Interface Type: Used for PBX trunking, Address Signaling Formats: In-band DTMF Out-of-band pulse (10-20 pps), Sig..
HDB3 line coding, Pulse shape conforming to ITU G.703, E3 BERT and extended loop-up, loop-down pattern generation and verificationManufacturer: Cisco Systems, Inc Manufacturer Part Number: MGXBNC2E3 Brand Name: Cisco Product Model: MGXBNC2E3 Product Name: 2-Port E3 Line Card Product Type: Service Module Application/Usage: Data Networking Interfaces/Ports: 2 x E3 WAN Interfaces/Ports Details: 2 x BNC E3 WAN Connectivity Media: 75-ohm Coaxial E3 Data Transfer Rate: 34.37 Mbps E3 Compatibility: Cisco MGX-CES..
The Catalyst 8540 Two-Port Enhanced Gigabit Ethernet Module is ideal for supporting Layer 3, Gigabit backbone applications that require nonblocking, wire-speed performance. The Two-Port Enhanced Gigabit Ethernet Module is supported by the Catalyst 8540 platform, a high-end multi-service switch that provides large enterprises and service providers with both Layer 3 and ATM switching in one integrated platform.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: C85EGE-2X-16K= Brand Name: Cisco Produc..
The Cisco 7600 Series Ethernet Services 20 Gbps (ES20) Line Card utilize an extensible design that enables service prioritization for voice, video, data, and wireless mobility services. Service Provider and Enterprise customers benefit from the improved economics, density, advanced Carrier Ethernet features, and the high performance of the ES20 fixed-configuration line cards.Central Forwarding Engine Compatibility, Up to 256K hardware-based forwarding entries with DFC-3C, Up to 128K Netflow entries with D..
This mixed-media network module has two Ethernet ports and two user-configurable WAN Interface Card (WIC) expansion slots. One Ethernet connection is via an Ethernet AUI DB-15 connector or 10BaseT RJ-45 connector. The second Ethernet connection is via an RJ-45 connector. The supported WICs include the 1-port serial (WIC-1T), 1-port ISDN BRI with ST and U interfaces (WIC-1B-S/T, WIC-1B-U), 1-port 56 kbps DSU/CSU (WIC-1DSU-56K4), and 1-port T1/FT1 DSU/CSU (WIC-1DSU-T1).Modular Router Solutions: LAN-to-LAN R..
Cisco introduces the Dual-Port single-wide Fast Ethernet Port Adapter for Cisco 7200 and 7500 Series routers. The PA-2FE provides the highest packet throughput available from Cisco 7x00 Fast Ethernet interfaces, and is the preferred choice for Fast Ethernet connectivity for Cisco 7x00 Routers. The PA-2FE is ideal for campus/enterprise backbones, data centers, high-performance routing between multiple Ethernet VLANs, and other deployments requiring line-rate Fast Ethernet connectivity.Manufacturer: Cisco S..
Cisco Systems offers 2-Port Fast Ethernet Port Adapter optimized for the specific requirements of campus and enterprise backbones and data centers.ISL support for high-performance routing between multiple Ethernet VLANs, IEEE 802.1d TB-VLAN support for transparently bridging VLANs Frame Processing: Transparent Bridging (802.1d), IP Fragmentation, Translational Bridging (802.1i, 802.1h)Manufacturer: Cisco Systems, Inc Manufacturer Part Number: PA-2FE-FX Brand Name: Cisco Product Model: PA-2FE-FX Product..
The FDDI module single-mode fiber (SMF), provides a SAS or DAS connection to the 100-Mbps FDDI backbone network using two single-mode, straight-tip (ST) fiber-optic connectors (for a SAS) or four single-mode, ST fiber-optic connectors (for a DAS).Manufacturer: Cisco Systems, Inc Manufacturer Part Number: WS-X5104= Brand Name: Cisco Product Model: WS-X5104 Product Name: 4-Port FDDI Module Product Type: FDDI Module Application/Usage: Switching Network Interfaces/Ports: 4 x FDDI Interfaces/Ports Details: 4 x..
The Cisco SPA122 ATA with Router is an analog telephone adapter that combines high-quality, feature-rich voice over IP (VoIP) service with LAN connectivity. Easy to install and use, the adapter provides two independent standard telephone ports to connect analog phones or fax machines to a VoIP service provider for clear voice calls, reliable fax connections, and simultaneous Internet and LAN with the integrated router. The standards-based SPA122 is compatible with Internet VoIP provider features such as cal..