Total Access 600 Series, T1 TDM
Single T1 TDM network interface
Migration path to packet-based technologies such as ATM with software download
TA 604/608 includes Echo Cancellation (G.168) and ADPCM (G.726) compression resources for instances when the unit is to be upgraded to T1 ATM
TA 612/616/624 will require an additional Echo Cancellation (G.168) and ADPCM (G.726) compression resource module for instances when the unit is to be upgraded to T1 ATM
Fixed FXS ports (4, 8, 12, 16, or 24 ports)
Optional FXO ..
Total Access 916e - Three T1 network interfaces (one of the T1's can be configured for DSX-1 applications), 16 FXS ports, two10/100 BaseT interfaces, single FXO interface and IP Router. Includes G.168 Echo Cancellation and support for G.711 and G.729a CODECs and supports up to 30 simultaneous TDM to VoIP call conversions. Supports VoIP applications using SIP. Router features include OSPF BGP, RIP V1 and V2, Static routes, 802.1d Bridging (all protocols), CLI; FR, MLFR, PPP and MLPPP WAN Protocols; SNMP, Tel..
Total Access 924e - Three T1 network interfaces (one of the T1's can be configured for DSX-1 applications), 24 FXS ports, two10/100 BaseT interfaces, single FXO interface and IP Router. Includes G.168 Echo Cancellation and support for G.711 and G.729a CODECs and supports up to 30 simultaneous TDM to VoIP call conversions. Supports VoIP applications using SIP. Router features include OSPF BGP, RIP V1 and V2, Static routes, 802.1d Bridging (all protocols), CLI; FR, MLFR, PPP and MLPPP WAN Protocols; SNMP, Tel..
The 19-Inch Chassis is intended for use in Central Office (CO), Remote Terminal (RT), and customer premises applications. The Total Access 1500 System is comprised of the chassis, common modules, and access modules. The Chassis is 19-inches wide by 3.50-inches high by 10.75 inches deep, and the chassis mounts in a standard 19-inch wide rack.Product Name: Total Access 1500 19-inch Chassis
Product Type: Router Chassis
Number of Total Expansion Slots: 18
Height: 3.5"
Width: 19.0"
Depth: 10.8"
Form Factor: Ra..
This ADTRAN Total Access 1500 Dual Foreign Exchange Office Dial Pulse Terminate with Transmission Only (FXO/DPT/TO) Access Module provides for two individual interfaces between a Total Access 1500 Pulse Code Modulation (PCM) backplane and a 2-wire voice frequency (VF) transmission and signaling facility. Each FXO interface provides for simultaneous signaling in each direction for use with 2-wire Off-Premises Station Lines, carrier extended PBX Trunks, or subscriber line Foreign Exchanges using ground or loo..
The Total Access 1500 FXS/GT Access Module is intended to be deployed in the Total Access 1500 Chassis. The FXS/GT provides for a 2-wire analog interface between a Voice Frequency (VF) transmission and signaling facility and the Total Access 1500 Pulse Code Modulation (PCM) backplane. The FXS interface provides for simultaneous four-state signaling in each direction for use with 2-wire off-premises station lines, carrier extended PBX trunks, or subscriber line foreign exchanges using ground or loop start si..
POTS, specials, and data supported
Up to 96 2-wire interfaces
Compact (2U) mounting for crowded COs or RTs
Fully redundant commons
TR-08 signaling fully compatible with SLC-96
Up to five times as dense as a D4 channel bank when used for specials
TL1 interface to NMA over X.25 and TCP/IP
SNMP management
Integrated digital and metallic test access
Mechanized Loop Testing (MLT)
Redundant power feeds
NEBS Level 3 and UL 1950 compliant..
The Dual FXS/GT provides for two individual 2-wire analog interfaces between a Voice Frequency (VF) transmission and signaling facility and the Total Access1500 Pulse Code Modulation (PCM) backplane. Each FXS interface provides for simultaneous signaling in each direction for use with 2-wire Off-Premises Station Lines, carrier extended PBX Trunks, or subscriber line Foreign Exchanges using ground or loop start signaling systems.Product Name: Total Access 1500 2W FXS/GT
Product Type: Voice Module
Compatibi..
The Total Access 1500 4W FXS Access Module is intended to be deployed in the Total Access 1500 Chassis. The 4W FXS provides for one individual 4-wire analog interface between a VF transmission and signaling facility and the Total Access 1500 Pulse Code Modulation (PCM) backplane. Each FXS interface provides for simultaneous four-state signaling in each direction for use with 4-wire off-premises extension, carrier extended PBX trunks, or subscriber line foreign exchanges using ground or loop start signaling ..