Product Name: Total Access 750/850 AC Power Supply Battery & Charger 115 VAC Applications
Product Type: Proprietary Power Supply
Input Voltage Type: AC
Input Voltage: 110 V AC
Input Voltage Range: 115 V AC
Compatibility: Total Access Chassis: 750, 850..
This Total Access 750/850 Power Supply Unit/Ring Generator is required for operation of the Total Access 750/850. It supports 48 VDC applications. An AC battery charger is available for AC powered applications...
Total Access 850 Single DSX-1 Module. Supports Nx56/64 data applications. Allows for up to 7 DSX-1 ports per chassis (6 modules + built-in RCU DSX-1 port). Currently works in conjunction with the TA 850 T1, TDM RCU...
Provides four analog voice interfaces per module (up to 24 ports) Supports Loop Start (LS), Ground Start (GS), Foreign Exchange Subscriber/Dial Pulse Originate (DPO), Private Line Automatic Ringdown (PLAR), and Ground Start/Loop Start to Ear and Mouth (E&M) conversions (tandem) Modes Supports V.90 modems and fax machines Unbalanced ringer interfaces Output ring voltage 97 to 115 Vrms, 5 REN per port Hot swappable 32 mA nominal look current Installs in any slot one through sixProduct Name: Total Access 750..
Single DSO DP module for the Total Access 750/850. Used for Central Office 56/64k DSO cross connects; used in conjunction with OCU DP; uses 50-pin (M) amp for connectivity. Only w/BCU L1 or L2 in Total Access 850...
The Foreign Exchange Office (FXO) and Foreign Exchange Subscriber (FXS) modules are used in the Total Access solutions to provide analog voice extension. The two units may be used in a back-to-back configuration. Here, the FXO interfaces to the central office switch, and the FXS interfaces to the customers telephone. Or, the more common configuration uses an FXS only, with the T1 interfacing directly to the CO switch (TR-08 mode). Four analog voice ports on the FXO/FXS access modules provide four individual..
Single OCU DP module for the Total Access 750/850/1500. Supports external 56/64k DSU/CSU applications. The OCU DP will support up to 18 kft of existing copper for remote DSU connectivity. Uses 50 pin (M) AMP for connectivity. Requires a BCU L1 or L2 when used in Total Access 850.For use in Total Access 750, Total Access 850 or Total Access 1500 integrated access devicesNEAR and FAR logic level bantam test access
Non-intrusive monitoring of received data from NEAR or FAR direction
Loop Quality Monitor an..
Noncontiguous bandwidth assignment Built-in DSU Synchronous operation to 1.536 Mbps in increments of 56/64 kbps, 50 percent duty cycle output clock at all rates.Product Type: Expansion Module
Data Transfer Rate: 1.54 Mbps
Number Of Ports/channels: 2
Interface Type: Serial V.35..
Total Access 850 Bank Controller Unit Activates integral T1 network interface on 850 chassis. Two BCU versions: List 1 (L1) and List 2 (L2), BCU L1 or BCU L2 activates V.35 port on rear of chassis when used in conjuction with V.35 Module.Product Type: Control Module
Application/Usage: Switching Network
Interfaces/Ports: 2 x Console
Interfaces/Ports Details: 2 x 9-pin DB-9 Console Management
Compatibility: Adtran Total Access 850..
Total Access 850 Bank Controller Unit - supports bank controller and network interface functions. Supports fractional T1 capability using RJ-48 on rear of chassis...
A compact, NEBS-compliant cabinet suitable for the customer premises or the central office provides added safety and reliability to the Total Access 850. The 2U design uses a minimum amount of rack space. When wall mounted, the 8.5-inch by 11-inch chassis occupies a space the size of a standard piece of notebook paper. Two Total Access 850 systems can be mounted side-by-side in either 19-inch or 23-inch relay racks. Pre-configured packages are available.This part number is the Chassis only.Cost-effectiv..
The Total Access 850 is an integrated access device designed for cost-effective deployment of voice and data services at the customer’s premises. The Total Access 850 benefits enterprise customers as well as integrated communications providers, such as CLECs, ILECs and ISPs, who require a customer premises device that integrates voice and data functions, and provides a viable migration path from TDM to packetbased technology. The Total Access 850 features remote management, an integrated IP router, and sp..
Dual Chassis for rackmount applications. Two Total Access 850s connected together provide compact side-by-side mount. This part number is for empty chassis. BCUs, RCUs, PSU and voice or data access modules must be ordered for operation. 19/23" rackmount brackets included. Female 50 pin amphenol connector...
Total Access 850 Nx56/64 Module. Supports Nx56/64 applications up to 1.536 Mbps in 56 or 64 kbps increments. Would only be used when using the BCU L1 or BCU L2. All RCUs have integrated V.35 support...
The Total Access 904 Integrated Services Router features all of the same robust routing and voice features of the widely deployed Total Access Integrated Access Devices (IADs), along with a host of new features and functions that enable cost-effective, reliable IP service delivery. The Total Access 904 Integrated Services Router use the ADTRAN Operating System (AOS) to simplify management and administration. Multiple models offer flexibility for varied applications from PRI delivery and trunking services to..