Your shopping cart is empty!
Your shopping cart is empty!
ATLAS 550 User Interface Module. Provides 2 X.21/V11 compliant interfaces, each supporting Nx 56/64 kbps operation, up to 2.048 Mbps. Includes adapter cable which provides a DB-15 interface for each port...
8-Port FXS Voice Interface CardProduct Type: Voice Interface Card (VIC) Application/Usage: Voice Interfaces/Ports: 8 x FXS Interfaces/Ports Details: 8 x RJ-45 FXS Compatibility: Adtan Atlas 550 Gateway Integrated Access Device (IAD)..
The FXO modules provide eight foreign exchange office loop interfaces. Either of these modules should be selected when connecting voice line cards of a key system or PBX is required. PBX extensions may be extended to a remote site by combining a TSU on the remote end with FXS modules. The module can emulate the CO side of a DID (Direct Inward Dial) trunk. The module provides standard 2 FXO or DPT functionality to distances of 2400 feet.Product Type: Expansion Module Application/Usage: Data Networking Inte..
The ATLAS 550 FXS option modules provides eight 2-wire interfaces that can operate in the PLAR, Tandem (MEGACOM), or FXS mode and supports PBX circuits, analog phones and modems. The module provides talk battery, off-hook supervision and balanced ringing for short loop or premises applications.Provides 8 FXS analog RJ interfaces to support major FXS applications...
ATLAS 550 User Interface Module. Provides 4 ISDN U-Interfaces. Includes 4 RJ45-RJ11 cables (7 ft.). Can be used in any user interface module slot...
ATLAS 550 User Interface Module. Provides 4 ISDN S/T Interfaces for User Termination applications.Module emulates Net 3 EuroISDN (with SPIDs and SPIDless), Lucent 5E, DMS100, and National ISDN protocols. Includes 4 RJ45-RJ11 cables (7 ft.). Can only be used in a user interface module slot...
Provides four ISDN BRI U-Interfaces BRI ports can be independently configured to emulate or terminate ISDN circuits from an ISDN switch Compliant with Lucent 5ESS, Nortel DMS100 and National ISDN Any BRI port can serve as timing source for system ANSI T1.601 compliant..
Independently configurable for DS-1, DSX-1, or PRI operation, Supports Drop/Insert and 1/0 Digital Cross-Connect (DACS) applicationsProduct Name: ATLAS 550 Quad T1/PRI Modl Product Type: T1/PRI Module Compatibility: ADTRAN ATLAS 550 Router Application/Usage: Wide Area Network Interfaces/Ports: 4 x Channelized T1/ISDN PRI Interfaces/Ports Details: 4 x Channelized T1/ISDN PRI Data Transfer Rate: 1.54 Mbps T1 Interface Type: Channelized T1/ISDN PRI Number of Ports/Channels: 4..
Provides interfaces that are independently configurable for DS-1, DSX-1, or PRI operationSupports Drop/Insert and 1/0 Digital Cross-Connect (DACS)applicationsEither T1 or PRI circuit can serve as timing source for systemSupports PRI switching applicationsSupports Frame Relay applications...
AdTran Atlas 500 series T1 RJ48 network interface card Model 1200307L2. Replaces 1200307L1.FEATURES# Provides1 T1 network interface through RJ-48 modular connector # Supports loop start, ground start, PLAR, and wink delay (for DNIS)..
Single network interface configurable for DS-1, DSX-1 or PRI, Supports Drop/Insert and 1/0 Digital Access Cross-Connect Systems (DACS) applications, Supports PRI switching applications, Supports Frame Relay applicationsProduct Name: ATLAS 550 T1/PRI Modl Product Type: Interface Module Compatibility: ADTRAN Atlas 550 Router Application/Usage: Data Networking Interfaces/Ports: 1 x Channelized T1/ISDN PRI Interfaces/Ports Details: 1 x Channelized T1/ISDN PRI Data Transfer Rate: 1.54 Mbps T1 Interface Type: C..
The ADTRAN ATLAS 550 Octal E&M module provides eight ports for 2-wire and 4-wire E&M applications for PBXs, key systems, and leased line analog modems.Frequency Response: 300-3400 hz (+/-1.0dB), Flash upgradeable. Operating Modes: 4-Wire E&M, 2-Wire E&M, 4-Wire Transmission Only (No signaling), 2-Wire Transmission Only (No signaling). Signaling Modes: E-Lead originate, Types I, II, III, IV, VProduct Name: ATLAS 550 User Interface Module Provides 8 E&M or to Interface Product Type: Expansion Module Compa..
ATLAS 800 functions as T1/T3 bandwidth manager, ISDN access switch, remote access concentrator, 3/1/0 Digital Access Cross-Connect System (DACS), and includes intelligent call routing. It features standalone, rackmount, or wallmount installations. There are two network interfaces, each independently configurable for T1, DSX-1 or PRI operation, eight expansion slots accept hot-swappable modules, 10BaseT Ethernet interface for SNMP/Telnet management. The unit has optional redundant power supply...
Redundant AC Power Supply module for ATLAS 830. Includes power cord. Occupies slots 7 and 8...
ATLAS 800 Series option module. Module provides two independent Video Ports for videoconferencing applications. Each Video Port provides an RS-366 dialing interface and an EIA-530 synchronous interface. When used with the Nx56/64 BONDING Module (Part #1200262L1), EIA-530 rates can range from 112K to 1472K.NOTE: Module is not supported in the ATLAS 800...
ATLAS 800 Series option module.Module provides two independent Video Ports for videoconferencing applications. Each Video Port provides an RS-366 dialing interface and an RS-449 synchronous interface. When used with the Nx56/64 BONDING Module (Part #1200262L1), RS-449 rates can range from 112K to 1472K. Includes two ATLAS Video RS-449 cables. NOTE: Module is not supported in the ATLAS 800...
