Your shopping cart is empty!
Your shopping cart is empty!
The Allied Telesyn Ethernet network adapter card is designed to simplify the task of building a new 10 Mbps or 100 Mbps Ethernet network or expanding an existing one. This adapter gives you the power and flexibility to build an Ethernet network suited to the unique requirements of your business environment.Host Interface: PCI Total Number of Ports: 2 Network (RJ-45): Yes Number of Network (RJ-45) Ports: 1 Number of ST Ports: 1 Network Technology: 10/100Base-TX, 100Base-FX Form Factor: Plug-in Card..
Allied Telesyn's AT-2701FX/FTX and AT-2746FX are the answers for those fiber adapters that support Wake on LAN (WOL) for either PCI 2.1 or PCI 2.2 systems but not both. Allied Telesyn's NICs support WOL through the PCI 2.2 bus and support PCI 2.1 WOL via external cables. Resistant to signal degradation, snooping, and interference, the AT-2701FX/FTX and AT-2746FX are ideal solutions for networks requiring protection from electrical interference and hackers.The small footprint, together with the low-profile o..
Allied Telesis' AT-2931SX/SC 64-bit Gigabit Fiber Adapter Card with 9KB Jumbo frames support for network upgrade needs. It helps to boost your Fast Ethernet server throughput ten times to 1000Mbps. With the 1000Base-SX fiber-optic connection, data transmission is both secure and faster. In order to reduce CPU use, it uses the adaptive interrupts and ultra-deep 96-KB packet buffer. Coupled with link aggregation and load balancing, it achieves the best performance of its class for server connectivity.Produc..
AT-2711FX Fast Ethernet Fiber Network Interface Card design gives you the maxim possible bandwidth and bus efficiency, other benefits are: capability and Low Power Consumption. For the current customers who are using Allied Telesis 100Mbps Fiber cards (AT-2701FX), and want to upgrade their systems to PCI-Express, AT-2711FX Fast Ethernet Fiber Network Interface Card is the ultimate solution.The customers can continue using their existing 100Mbps Fiber network without adding any more new equipment. It is a si..
Allied Telesyn's AT-2701FX is the answer for those fiber adapters that support Wake on LAN (WOL) for either PCI 2.1 or PCI 2.2 systems but not both. Allied Telesyn's NICs support WOL through the PCI 2.2 bus and support PCI 2.1 WOL via external cables. Resistant to signal degradation, snooping, and interference, the AT-2701FX is an ideal solution for networks requiring protection from electrical interference and hackers. The small footprint together with the low-profile option of the AT-2701FX make this prod..
AT-2711FX Fast Ethernet Fiber Network Interface Card design gives you the maximum possible bandwidth and bus efficiency, other benefits are, capability and Low Power Consumption. For the current customers who are using Allied Telesis 100Mbps Fiber cards, and want to upgrade their systems to PCI-Express, AT-2711FX Fast Ethernet Fiber Network Interface Card is the ultimate solution.The customers can continue using their existing 100Mbps Fiber network without adding any more new equipment. Its a single pack...
AT-2711FX Fast Ethernet Fiber Network Interface Card design gives you the maxim possible bandwidth and bus efficiency, other benefits are: capability and Low Power Consumption. For the current customers who are using Allied Telesis 100Mbps Fiber cards (AT-2701FX), and want to upgrade their systems to PCI-Express, AT-2711FX Fast Ethernet Fiber Network Interface Card is the ultimate solution.Product Name: 100BFX ST Fiber PCI Express Adapter Card TAC Number of ST Ports: 1 Total Number of Ports: 1 Product Ser..
Allied Telesyn / Telesis Rapier AT-RPG6 Layer 3 Gigabit Ethernet Network Switch 6-Port 10/100/1000BASE-T + Dual Expansion Gigabit modules AT-A39/T..
The AT-CV5M02 adds management configuration and monitoring capabilities to the AT-CV5000 Converteon media chassis.A chassis can be installed with any range of media blades, which can be used in an unmanaged mode. With the addition of a management card to the chassis, all the blades setup option can be configured via the management module, allowing a network administrator to change configuration remotely, and monitor the status of both the chassis and the links.Product Name: Converteon Management Module Pr..
The AT-SPEX offers a 2 km over Multi-Mode Fibre (1310nm) option to extend your network. The AT-SPEX is compatible with all the Allied Telesis range of products which have an SFP port.Product Name: At-Spex 2KM MMF 1310NM-1000BSX SFP Hotswap Product Type: SFP (mini-GBIC) Product Series: AT-SPF Product Model: AT-SPEX Application/Usage: Data Networking Interfaces/Ports: 1 x 1000Base-LX Interfaces/Ports Details: 1 x LC 1000Base-LX Form Factor: Hot-swappable Data Transfer Rate: 1 Gbps Gigabit Ethernet Interface..
The AT-SPLX10 SFP Module is a latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity.This Hot-swappable, fiber interface simply plug into a SFP slot on Allied Telesyn SFP compatible products.Product Type: SFP (mini-GBIC) Application/Usage: Data Networking Interfaces/Ports: 1 x 1000Base-LX Interfaces/Ports Details: 1 x 1000Base-LX Compatibility: All the Allied Telesyn range of products support SFP uplink connections..
