The Cisco 2-Channel SFP WDM Transponder expands the range of applications and platforms supported by coarse wavelength-division multiplexing (CWDM) and dense wavelength-division multiplexing (DWDM) pluggable optics solutions from Cisco. It supports any client, any protocol, and any speed between 155 Mbps (OC-3/STM-1) and 2.488 Gbps (OC-48/STM-16).Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: WDM-SFP-2CH-CONV=
Brand Name: Cisco
Product Name: 2-Channel SFP WDM Transponder Module
Product Type: S..
The HWIC-2SHDSL 2-Pair High-Speed WAN Interface Card provide G.SHDSL connectivity to a Wide Area Network.The 2-pair G.SHDSL HWICs supersede the existing G.SHDSL WAN Interface Card which is a WIC-based G.SHDSL solution.Based on ITU Recommendation G.991.2, Offers symmetrical WAN speeds of 2.304 Mbps per pair up to 9.2 Mbps over four pairs on the 4-pair by bonding with IMA Version 1.1, Supports Wetting Current, Sustains up to 8 permanent virtual circuits (PVCs) per HWIC, Offers extensive ATM class-of-service..
The Layer 3 Cisco 2-Port Fast Ethernet High-Speed WAN interface card Cisco 3800 Series Integrated Services Routers offer small-to-large- sized businesses and enterprise branch-office customers the option to add Layer 3 routed ports with many advanced features, including quality-of-service (QoS) and rate-limiting capabilities.Product Name: HWIC Two 10/100 Routed Port
Product Type: HWIC
Compatibility: Cisco 3825 Integrated Services Routers, Cisco 3845 Integrated Services Routers
Dimensions: 0.8" Height x 3...
Cisco Systems provides Token Ring and Fast Ethernet inter-VLAN bridging and routing capabilities with the Dual-Port Token Ring ISL Port Adapter PA-2FEISL-FX. The PA-2FEISL enables network administrators to bridge and route multiple VLANs of Token Ring and Ethernet traffic over the same high-speed backbone trunks. The two-port Token Ring ISL fiber and copper port adapters deliver Fast Ethernet with ISL VLAN transport over switch-to-switch backbone connections or switch-to-server data-center attachments, but ..
The 10GE interface card (part numbers IPS-2X10GE-SR-INT and IPS-2X10GE-SR-INT=) provides two 10000 Base-SX (fiber) interfaces. The IPS-4260 supports one 10GE interface card for a total of two 10GE fiber interfaces. The IPS 4270-20 supports up to two 10GE interface cards for a total of four 10GE fiber interfaces. The card ports require a multi-mode fiber cable with an LC connector to connect to the SX interface of IPS-4260 and IPS 4270-20. The 10GE interface card does not support hardware bypass.Product Ty..
Multiflex trunk interface card support generic 2-port T1 or E1 trunk interfaces for voice, data, and integrated voice and data applications. This card provide basic structured and unstructured service for T1 or E1 networks. Supporting unstructured E1 (G.703) applications. To simplify remote management, the G.703 version includes a fully managed DSU.Enhanced clocking capabilities, Unstructured E1/G.703 Support, Data Support WIC Mode, Voice Support VIC Mode, Drop-and-Insert MultiplexingProduct Name: 2-Por..
The Third-generation 1- and 2-port G.703 Multiflex Trunk voice/WAN Interface Cards (product numbers VWIC3-1MFT-G703 and VWIC3-2MFT-G703) support not only unstructured E1 (G.703) but also all the features of the other Cisco MFT VWIC3 cards, including drop and insert. Additional flexibility is provided on the 2 port G.703 Multiflex Trunk voice/WAN Interface Cards with the capability to configure one port for unstructured E1 (G.703) while configuring the other for standard framed E1.Manufacturer: Cisco Syste..
These flexible interface cards support multiple integrated data, voice and video applications, facilitating the migration from data only as well as circuit-switched voice/video services to a packet voice/video solutionProduct Name: VWIC3-2MFT-T1/E1= 2 Port 3rd Gen Multiflex Trunk Voice/WAN Interface T1/E1
Product Type: WAN Module
Compatibility: Cisco 1900 Series Router Chassis, Cisco 2900 Series Router Chassis, Cisco 3900 Series Router Chassis
Product Model: VWIC3-2MFT-T1/E1
Dimensions: 0.8" Height x 3.1"..
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: 800-IL-PM-2
Brand Name: Cisco
Product Name: 2 Port Power over Ethernet Injector
Product Type: PoE Injector
Output Voltage: 48 V DC
Output Ports: 2 x RJ-45..
This 2-port asynchronous/ synchronous serial WAN Interface Card supports two low-speed serial interfaces at speeds up to 128kbps. This WAN interface card supports asynchronous and synchronous traffic, and plugs directly into a WAN Interface Card (WIC) expansion slot.Modular Router Solutions: LAN-to-LAN Routing, Serial & Legacy Concentration, VPN & Firewall Solutions Comments:, For use in a Cisco 2600 series and 3600 series with the NM-1FE2W, NM-2FE2W, NM-1FE1R2W and NM-2W or a Cisco 1720Product Name: 2-..
The Cisco E1/T1 ISDN PRI Network Module's integrated channel service unit (CSU) provides direct connection to the Telecommunications network, thus allowing customers to consolidate customer premises equipment (CPE). This provides multifunction dial access aggregation, routing functionality, VPN and firewall security, and other capabilities right inside the Cisco router in power branch office environments. Both the 1-port and 2-port versions offer support for balanced and unbalanced E1 connectivity and confo..
The Cisco 2-Port Channelized E1/T1/ISDN-PRI HWIC combine multiple T1/E1 WAN connectivity- Channelized T1/E1 and ISDN Primary Rate Interface (PRI), in the same card. Applications include fractional or full T1/E1 WAN connectivity, ISDN PRI for primary WAN link or WAN backup, and dial access aggregation.Integrated CSU/DSU per port, Fractional T1/E1 (n x DS-0) or full T1/E1, Balanced or unbalanced E1 termination in the same module, E1 unframed and framed modes (G.703 or G.704)Product Name: 2 Port Channelize..
The Cisco I-Flex approach combines shared port adapters (SPAs) providing an extensible design that enables service prioritization for data, voice, and video services. Enterprise and service provider customers can take advantage of improved slot economics resulting from modular port adapters that are interchangeable across Cisco routing platforms.High-Level Data Link Control (HDLC), Point-to-Point Protocol (PPP), Frame Relay, MLPPP, MLFRManufacturer: Cisco Systems, Inc
Manufacturer Part Number: SPA-2XCT3..
The combination of channelized and clear channel T3 functions makes the Cisco 2-Port Channelized T3 SPA ideal for today's rapidly changing WAN environment. As an integral part of a service node where customer bandwidth needs are uncertain, the Cisco Channelized T3 SPA allows service providers to avoid determining beforehand how ports will be allocated between DS0, DS1, and DS3 connections. For enterprise remote-site connection, the flexibility to support DS0, DS1, and DS3 connections means this SPA reduces ..
The Cisco 2-Port Clear Channel T3/E3 Shared Port Adapter combines shared port adapters (SPAs) and SPA interface processors (SIPs), leveraging an extensible design that enables service prioritization for voice, video and data services. Enterprise and service provider customers can take advantage of improved slot economics resulting from modular port adapters that are interchangeable across Cisco routing platforms. The 2-Port Clear Channel T3/E3 Shared Port Adapter design maximizes connectivity options and of..
Two-port DID (Direct Inward Dial) voice/fax interface card Spare Direct Inward Dialing (DID) is a service offered by telephone companies that enables callers to dial directly an extension on a PBX or packet voice system (for example, Cisco CallManager and Cisco IOS® routers and gateways) without the assistance of an operator or automated call attendant. This service makes use of DID trunks, which forward only the last three to five digits of a phone number to the PBX, router, or gateway. For example, a comp..
The two-port E&M voice interface card for Cisco voice/fax network modules is used to connect to PBX or key system trunk lines. This voice interface card works with existing phone and fax equipment to provide voice and fax services over IP, and is compatible with H.323 standard for audio and videoconferencing.Voice & Fax Integration, VPN & Firewall Solutions, Supports 2- and 4-wire interfaces, Interface Type: Used for PBX trunking, Address Signaling Formats: In-band DTMF Out-of-band pulse (10-20 pps), Sig..
HDB3 line coding, Pulse shape conforming to ITU G.703, E3 BERT and extended loop-up, loop-down pattern generation and verificationManufacturer: Cisco Systems, Inc
Manufacturer Part Number: MGXBNC2E3
Brand Name: Cisco
Product Model: MGXBNC2E3
Product Name: 2-Port E3 Line Card
Product Type: Service Module
Application/Usage: Data Networking
Interfaces/Ports: 2 x E3 WAN
Interfaces/Ports Details: 2 x BNC E3 WAN
Connectivity Media: 75-ohm Coaxial E3
Data Transfer Rate: 34.37 Mbps E3
Compatibility: Cisco MGX-CES..
The Catalyst 8540 Two-Port Enhanced Gigabit Ethernet Module is ideal for supporting Layer 3, Gigabit backbone applications that require nonblocking, wire-speed performance. The Two-Port Enhanced Gigabit Ethernet Module is supported by the Catalyst 8540 platform, a high-end multi-service switch that provides large enterprises and service providers with both Layer 3 and ATM switching in one integrated platform.Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: C85EGE-2X-16K=
Brand Name: Cisco
Produc..
The Cisco 7600 Series Ethernet Services 20 Gbps (ES20) Line Card utilize an extensible design that enables service prioritization for voice, video, data, and wireless mobility services. Service Provider and Enterprise customers benefit from the improved economics, density, advanced Carrier Ethernet features, and the high performance of the ES20 fixed-configuration line cards.Central Forwarding Engine Compatibility, Up to 256K hardware-based forwarding entries with DFC-3C, Up to 128K Netflow entries with D..
This mixed-media network module has two Ethernet ports and two user-configurable WAN Interface Card (WIC) expansion slots. One Ethernet connection is via an Ethernet AUI DB-15 connector or 10BaseT RJ-45 connector. The second Ethernet connection is via an RJ-45 connector. The supported WICs include the 1-port serial (WIC-1T), 1-port ISDN BRI with ST and U interfaces (WIC-1B-S/T, WIC-1B-U), 1-port 56 kbps DSU/CSU (WIC-1DSU-56K4), and 1-port T1/FT1 DSU/CSU (WIC-1DSU-T1).Modular Router Solutions: LAN-to-LAN R..
Cisco introduces the Dual-Port single-wide Fast Ethernet Port Adapter for Cisco 7200 and 7500 Series routers. The PA-2FE provides the highest packet throughput available from Cisco 7x00 Fast Ethernet interfaces, and is the preferred choice for Fast Ethernet connectivity for Cisco 7x00 Routers. The PA-2FE is ideal for campus/enterprise backbones, data centers, high-performance routing between multiple Ethernet VLANs, and other deployments requiring line-rate Fast Ethernet connectivity.Manufacturer: Cisco S..
Cisco Systems offers 2-Port Fast Ethernet Port Adapter optimized for the specific requirements of campus and enterprise backbones and data centers.ISL support for high-performance routing between multiple Ethernet VLANs, IEEE 802.1d TB-VLAN support for transparently bridging VLANs
Frame Processing: Transparent Bridging (802.1d), IP Fragmentation, Translational Bridging (802.1i, 802.1h)Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: PA-2FE-FX
Brand Name: Cisco
Product Model: PA-2FE-FX
Product..
The FDDI module single-mode fiber (SMF), provides a SAS or DAS connection to the 100-Mbps FDDI backbone network using two single-mode, straight-tip (ST) fiber-optic connectors (for a SAS) or four single-mode, ST fiber-optic connectors (for a DAS).Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: WS-X5104=
Brand Name: Cisco
Product Model: WS-X5104
Product Name: 4-Port FDDI Module
Product Type: FDDI Module
Application/Usage: Switching Network
Interfaces/Ports: 4 x FDDI
Interfaces/Ports Details: 4 x..
The Cisco SPA122 ATA with Router is an analog telephone adapter that combines high-quality, feature-rich voice over IP (VoIP) service with LAN connectivity. Easy to install and use, the adapter provides two independent standard telephone ports to connect analog phones or fax machines to a VoIP service provider for clear voice calls, reliable fax connections, and simultaneous Internet and LAN with the integrated router. The standards-based SPA122 is compatible with Internet VoIP provider features such as cal..
The Cisco® SM-2GE-SFP-CU Service Module has 2 Small Form-Factor Pluggable (SFP) slots that can be plugged into Cisco Integrated Services Routers Generation 2 (ISR G2) Service Module slots to provide additional copper and optical Gigabit Ethernet ports.Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: SM-2GE-SFP-CU
Brand Name: Cisco
Product Name: SM-2GE-SFP-CU Service Module
Product Type: Service Module
Application/Usage: Data Networking
Expansion Slots: 2 x SFP
Management: CLI
Compatibility: Cisc..
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: C85GE2XACL64K
Brand Name: Cisco
Product Model: C85GE2XACL64K
Product Name: 2-Port Gigabit Ethernet Interface Module
Product Type: Interface Module
Application/Usage: Data Networking
Interfaces/Ports: 2 x 10/100/1000Base-T LAN
Interfaces/Ports Details: 2 x RJ-45 10/100/1000Base-T LAN
Connectivity Media: Twisted Pair 10/100/1000Base-T
Data Transfer Rate: 10 Mbps Ethernet
Data Transfer Rate: 100 Mbps Fast Ethernet
Data Transfer Rate: 1 Mbps Gigabit Eth..
The Cisco 2-Port Gigabit Ethernet backcard for the Cisco MGX 8800/8900 Series Route Processor Module (RPM) XF is designed for use with the Cisco MGX 8800 and MGX 8900 Series wide-area edge switches. This backcard is for use with the Cisco MGX 8800/8900 Series MGX-RPM-XF-512 to provide up to OC-24 of bandwidth for IP services in the new world of data networking.Configurable Clock Sources, Optimized for IP-based Differentiated Services, Interface MAC address assignmentManufacturer: Cisco Systems, Inc
Manu..
The Cisco 7304 Gigabit Ethernet SPA is designed to meet the growing demand for customers who need cost-effective and simple connectivity for Internet gateway, peering, or Metro Ethernet access applications.Spare product, Full-duplex operation in fiber or SFP mode and half- or full-duplex operation in RJ-45 mode, Jumbo frame supportManufacturer: Cisco Systems, Inc
Manufacturer Part Number: SPA-2GE-7304=
Brand Name: Cisco
Product Name: 2-Port Gigabit Ethernet Shared Port Adapter
Product Type: Shared Port..
The Cisco 2-port GbE SPA is available on high-end Cisco routing platforms offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco SPA/SIP portfolio continues the company's focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows deployment of different interfaces (packet over SONET/SDH [POS], ATM, Ethernet, etc.) on the same interface processor.High-density..
The High-Speed Serial Interface (HSSI) port adapters (PA-H and PA-2H) are available on Cisco 7200 series routers, on second-generation Versatile Interface Processors (VIP2s) in Cisco 7500 series routers, and on Cisco 7000 series routers with the 7000 Series Route Switch Processor (RSP7000) and 7000 Series Chassis Interface (RSP7000CI).The PA-H provides one high-speed synchronous serial interface and the PA-2H provides two high-speed synchronous serial interfaces that support full-duplex and data rates up ..
The ADSL over ISDN HWIC(High-Speed WAN Interface Card) combined with the Cisco 1841 integrated services router (ISR) and the Cisco 2800 and 3800 series integrated services routers (ISRs), provide high-speed digital data transmission between customer premises equipment (CPE) and a central office.Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: HWIC-ADSLI-B/ST
Brand Name: Cisco
Product Name: ADSL over ISDN HWIC
Product Type: HWIC
Application/Usage: Wide Area Network
Interfaces/Ports: 1 x ADSLoISDN..
The multichannel E1/PRI port adapters (PA-MC-2E1/120 integrate data service unit (DSU) functionality and E1 channel support into the Cisco router. The PA-MC-2E1/120 2-port independent E1 (120-ohm) connections via RJ-48C connectors.The PA-MC-2E1/120 can provide up to 62 separate full-duplex HDLC channelized E1, fractional E1, full E1, or unframed E1 interfaces.Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: PA-MC-2E1/120
Brand Name: Cisco
Product Name: 2-Port Multichannel E1/PRI Port Adapter
Pro..
This Cisco 2-port Multichannel Enhanced Capability Port Adapter (PA-MC-2T3-EC) for the Cisco 7200 Series Routers and Cisco 7301 Router is enhanced version of the earlier multichannel T3 port adapters. This new port adapter address specific scalability challenges by increasing performance and lowering CPU utilization. It offload advanced capabilities and features from the CPU, delivering them directly to meet enterprise and service provider WAN link-aggregation service requirements. Each T3 interface can be ..
Key Features: Up to eight independent T1 ports per card, Channelized T1, fractional T1, full rate T1, and ISDN PRI supported, Internal or network clocking selectable on each port, Line and payload loopback capabilities, Full bit error rate testing capabilities on any T1, Alarm detection: alarm indication, Support for Frame Relay, Point-to-Point Protocol (PPP), HDLC, SMDS DXI, ISDN PRI, X.25 connections, Transmits and receives data bidirectionally at the rate of 1.536 Mbps for each T1 port T1/DSX1 version fe..
Cisco Fourth-Generation Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module - Expansion module - T1/E1 x 2 - T-1/E-1 - for Cisco 4451-XThe Cisco Fourth-Generation T1/E1 Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X integrated services routers. These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unpara..
The 2-Port OC-12 Packet-over-SONET (POS) backcard for the Cisco MGX 8800/8900 Series Route Processor Module (RPM) XF is designed for use with the Cisco MGX 8800 and MGX 8900 Series wide-area edge switches. These backcard is for use with the Cisco MGX 8800/8900 Series MGX-RPM-XF-512 to provide up to OC-24 of bandwidth for IP services in the new world of data networking.Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: MGX-2OC12POS
Brand Name: Cisco
Product Model: MGX-2OC12POS
Product Name: 2-port ..
The OC-12c/STM-4 POS/SDH Line Card is a versatile, high-performance line card well suited for a variety of applications including high-speed WAN uplinks in a CPE deployment, high-speed enterprise backbone, and high-speed uplink for Cisco 7300 deployment as a medium density, medium speed edge-aggregation router in tier 2 and 3 service provider POPs.Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: 7300-2OC12POS-SMI=
Brand Name: Cisco
Product Name: 2-port OC-12c/STM-4 Packet over SONET/SDH
Product ..
The Cisco 2-Port OC-12c/STM-4 POS Shared Prot Adapter is available on high-end Cisco Systems routing platforms offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco 2-Port OC-12c/STM-4 POS Shared Prot Adapter continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco 2-Port OC-12c/STM-4 POS Shared Prot Adapter allows different interfaces (Packet over SONET/SDH [PO..
This ATM SPA provide cost-effective wide-area networking (WAN) connectivity for service providers across their existing ATM networks. Using a highly modular approach, the SPA and SIP form factors maximize the flexibility of an existing Cisco 7600 series router, allowing service providers to mix and match SPAs to more easily meet evolving port-density and networking media needs.Product Type: Shared Port Adapter
Application/Usage: Data Networking
Expansion Slots: 2 x SFP Free
Compatibility: Cisco 7600 SIP-2..
The Cisco OC-3c/STM-1 POS/SDH Line Card in two ports, is a modular, versatile card suited for a variety of solutions, from WAN uplinks in a CPE deployment to aggregation at the edge where service provider and enterprise networks meet. Using the Cisco Network Services Engine (NSE)-100 Route Processor on the Cisco 7304 Router, this line card can use multiprotocol capability from Cisco IOS Software, and PXF technology to deliver hardware-accelerated IP network services.Spare Product, SONET/SDH Framing, SONET..