Your shopping cart is empty!
Your shopping cart is empty!
The Cisco E1/T1 ISDN PRI Network Module's integrated channel service unit (CSU) provides direct connection to the Telecommunications network, thus allowing customers to consolidate customer premises equipment (CPE). This provides multifunction dial access aggregation, routing functionality, VPN and firewall security, and other capabilities right inside the Cisco router in power branch office environments. Both the 1-port and 2-port versions offer support for balanced and unbalanced E1 connectivity and confo..
The Cisco 1-Port Channelized OC-12/STM-4 SPA is available on high-end Cisco routing platforms offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco SPA/SIP portfolio continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows different interfaces (Packet over SONET/SDH [POS], ATM, Ethernet, etc.) to be deployed on the same interface process..
The Cisco 12000 Series Channelized IP Services Engine (ISE) line card provide a solution for the ever-increasing need for bandwidth and transmission capacity. This line card take advantage of existing infrastructure, significantly lowering provisioning costs in terms of transmission and routing equipment. With the high-density aggregation offered by these line cards, service providers can build cost-efficient networks to serve large numbers of customers using telco infrastructure for IP access.Spare Produ..
Enterprise customers are continuing to see WAN usage increase as Internet and intranet usage grows. Bandwidth demand is driven by applications such as VoIP, videoconferencing, and large file transfers. As the connectivity needs of remote sites scale from nxDS1/E1 to DS3/E3, there is increasing urgency to find a scalable high-speed leased line aggregation solution at the head office. Cisco Systems has responded by developing a channelized OC12/STM4 card that supports DS3, E3 as well as subrate DS3 and OC3c/S..
The Cisco 1-Port Channelized OC-48/STM-16 SPA is available on high-end Cisco routing platforms offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco SPA/SIP portfolio continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows different interfaces (Packet over SONET/SDH [POS], ATM, Ethernet, etc.) to be deployed on the same interface proces..
Cisco 7600 Series 1-Port Channelized Optical Services Module for channelized Synchronous Optical Network (SONET) and Synchronous Digital Hierarchy (SDH) services provide for the rapid, efficient addition of circuits within existing optical connections. When an OC-12/STM-4 circuit is established, all channels from OC-3c/STM-1 to DS0 can be remotely provisioned, eliminating the need for the multiplexer line-card installations that are normally required to increase the available number of electrical circuits. ..
The Cisco 1-Port Channelized STM-1/OC-3 SPA addresses these needs by sharply reducing the amount of aggregation equipment and interconnectivity needed between edge and backbone routers. The SPA provides Cisco 6500 Switches, 7600 and 12000 Series Routers with support for T1/E1 aggregation. Designed for telcos and Internet service providers (ISPs), the SPA includes one OC-3/STM-1 port, which can be configured with multiple channels of nxT1, T1, fractional T1, or DS-0 in a SONET environment or nxE1, E1, fracti..
The 1-port channelized T1/ISDN-PRI network module supports a single channelized T1/ISDN PRI connection via a DB-15 connector.ISDN Concentration, LAN-to-LAN Routing, Serial & Legacy Concentration, VPN & Firewall Solutions, Receiver sensitivity: 14 dB , For reliable operation, a 3 dB margin is recommendedManufacturer: Cisco Systems, Inc Manufacturer Part Number: NM-1CT1 Brand Name: Cisco Product Name: Channelized T1/ISDN-PRI Network Module Product Type: Network Module Application/Usage: Data Networking I..
The channelized T1/ ISDN PRI modules are available with and without a built-in CSU and with one or two ports. The channelized T1/ISDN PRI modules connect to an external CSU. The channelized T1/ISDN PRI CSU modules connect directly to the network. Each of the T1 modules provides up to 24 virtual channels per T1 port. The channelized E1/ISDN PRI modules are available with one or two E1 ports with balanced or unbalanced interfaces and are compatible with the International Telecommunication Union Telecommunicat..
The Cisco 1-Port Channelized E1/T1/ISDN-PRI HWIC combine multiple T1/E1 WAN connectivity-Channelized T1/E1 and ISDN Primary Rate Interface (PRI), in the same card. Applications include fractional or full T1/E1 WAN connectivity, ISDN PRI for primary WAN link or WAN backup, and dial access aggregation.Product Type: HWIC Application/Usage: Wide Area Network Interfaces/Ports: 1 x Channelized E1/T1/ISDN-PRI Interfaces/Ports Details: 1 x RJ-48C Channelized E1/T1/ISDN-PRI Dimensions: 0.8" Height x 3.1" Width x 4..
High-speed High-Level Data Link Control (HDLC) data, Integrated data service unit (DSU) functionality, Support for 16- and 32-bit cyclic redundancy checks (CRCs), Support for G.751 framing or bypass framingProduct Name: 1 Port Clear CH T3/E3 Enh-Capability Product Type: Port Adapter Compatibility: Cisco 7200 VXR Routers, Cisco 7301 Routers Product Model: PA-T3/E3-EC Application/Usage: Data Networking Interfaces/Ports: 1 x T3/E3 WAN Interfaces/Ports Details: 1 x BNC T3/E3 WAN Data Transfer Rate: 44.74 Mbps..
The Cisco® integrated Cable high-speed WAN interface cards (HWICs) provide lower total cost of ownership, advanced quality-of-service (QoS) enforcement, and advanced monitoring and load-balancing capabilities for customers by optionally integrating a DOCSIS 2.0-based cable modem within a Cisco Integrated Services Router (ISR) or Cisco IAD2430 Series Integrated Access Device.Additionally, the new Cisco Cable HWICs greatly expand the portfolio of managed business-class cable services cable operators can of..
The CISCO NM-1A-T3 DS3 and E3 ATM network modules extends the ATM family of WAN interfaces that include the ATM25, 4/8 port ATM with IMA, and the OC-3/STM1 network modules. The DS3/E3 ATM network modules provide a cost-effective solution that can be deployed in the Cisco 2600, 3600, and 3700 Series as service provider customer premise equipment (CPE) or at large enterprise branch and smaller regional office locations for consolidating multiservice data, voice and video services over a single ATM link.Dev..
The CISCO NM-1A-T3 DS3 and E3 ATM network modules extends the ATM family of WAN interfaces that include the ATM25, 4/8 port ATM with IMA, and the OC-3/STM1 network modules. The DS3/E3 ATM network modules provide a cost-effective solution that can be deployed in the Cisco 2600, 3600, and 3700 Series as service provider customer premise equipment (CPE) or at large enterprise branch and smaller regional office locations for consolidating multiservice data, voice and video services over a single ATM link.Devi..
This Cisco 1-port Enhanced Application-Oriented Network Module provides an essential point of convergence between today's intelligent networks and applications based on highly distributed, service-oriented and traditional architectures. This module is based AON technology that embeds a new class of application intelligence into the network to better meet the underlying needs of applications for real-time visibility, security, event-based messaging, optimized delivery, and other core integration and deployme..
The PA-A6-T3 is a single-width, single-port, ATM port adapter for the Cisco 7200 series router, Cisco 7200VXR series router, Cisco 7301 router, Cisco 7401ASR routers, Cisco 7500 series routers, and Cisco 7600 series routers with FlexWAN. With advanced ATM features, the PA-A6-T3 supports broadband aggregation, WAN aggregation, and campus/MAN aggregation.Product Type: Port Adapter Application/Usage: Data Networking Interfaces/Ports: 1 x T3 Interfaces/Ports Details: 1 x BNC Duplex T3 Compatibility: Cisco 720..
The PA-A6-E3 is a single-width, single-port, ATM port adapter for the Cisco 7200 series router, Cisco 7200VXR series router, Cisco 7301 router, Cisco 7401ASR routers, Cisco 7500 series routers, and Cisco 7600 series routers with FlexWAN. With advanced ATM features, the PA-A6-E3 supports broadband aggregation, WAN aggregation, and campus/MAN aggregation.Up to 8191 simultaneously available virtual circuits (VCs), Up to 2000 simultaneous segmentations and reassemblies (SARs), ATM adaptation layer 5 (AAL5) fo..
The PA-A6-OC3MM is a single-width, single-port, ATM port adapter for the Cisco 7200 series router, Cisco 7200VXR series router, Cisco 7301 router, Cisco 7401ASR routers, Cisco 7500 series routers, and Cisco 7600 series routers with FlexWAN. With advanced ATM features, the PA-A6-OC3MM supports broadband aggregation, WAN aggregation, and campus/MAN aggregation.Interfaces/Ports: 1 x OC-3c/STM-1 Interfaces/Ports Details: 1 x SC Duplex OC-3c/STM-1 Compatibility: Cisco 7200 series router, Cisco 7200VXR series r..
This mixed-media network module has one Ethernet port and two user-configurable WAN Interface Card (WIC) expansion slots. The Ethernet connection is via an Ethernet AUI DB-15 connector or 10BaseT RJ-45 connector. The supported WICs include the 1-port serial (WIC-1T), 1-port ISDN BRI with ST and U interfaces (WIC-1B-S/T, WIC-1B-U), 1-port 56 kbps DSU/CSU (WIC-1DSU-56K4), and 1-port T1/FT1 DSU/CSU (WIC-1DSU-T1).Manufacturer: Cisco Systems, Inc Manufacturer Part Number: NM-1E2W= Brand Name: Cisco Product Mod..
