Your shopping cart is empty!
Your shopping cart is empty!
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: M-ASR1002X-16GB Brand Name: Cisco Product Name: 16GB DRAM Memory Module Product Type: RAM Module Memory Size: 16 GB Memory Technology: DRAM Number of Modules: 4 x 4 GB Compatibility: Cisco ASR 1002-X Router..
Dipole Antenna with base for use with 3G cards...
The VWIC2-1MFT-T1/E1 1-Port Multi flex Trunk Interface Card supports data and voice applications on the Cisco 1721 (data only), 1751 and 1760 Modular Access Routers, the Cisco 2600XM Multi service Router, the Cisco 2691 Multi service Platform, the Cisco 3662 Telco Versatile DCN Access Platform, the Cisco 3725 and 3745 Multi service Routers, and the Cisco 1841 (data only), 2801, 2811, 2821, 2851, 3825, and 3845 Integrated Services Routers. The Cisco MFT VWIC2 combines WAN-interface-card (WIC) and voice-inter..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: MEM-7835-H1-1GB= Brand Name: Cisco Product Name: 1 GB SDRAM Memory Module Product Type: RAM Module Memory Size: 1 GB Memory Technology: SDRAM Number of Pins: 168-pin Compatibility: Cisco MCS 7835-H1..
The SL-Series Card is a four-port, 1.0625- or 2.125-Gbps Fibre Channel/FICON card. It uses pluggable gigabit interface converter (GBIC) optical modules for the client interfaces, enabling greater user flexibility when terminating multiple equipment types on to the same SL-Series Card. This card has four virtual SONET/SDH interfaces and the virtual ports can be provisioned using Contiguous Concatenation (CCAT) or Virtual Concatenation (VCAT) in sizes ranging from STS1-Nv to STS-3c-Nv in a SONET environment a..
The DC output connectors require a Cisco 16-pin-to-14-pin cable (CAB-RPS-1614=) to connect to supported devices. One cable is supplied with the RPS; additional cables can be ordered separately. The 16-pin connector plugs into the RPS and the 14-pin connector plugs in to the device. Use only the Cisco cable for this connection.Product Name: 1 RPS 675 Connector Cable 16/14 Product Type: Standard Power Cord Cord Length: 3.94 ft Plug/Connector Type: 16-pin, 14-pin Compatibility: Cisco RPS 675..
Dependable and voluminous, this Cisco 1 TB hard drive is designed for providing a great deal of spare disk space for the foreseeable future. This internal 3.5-inch hard drive is the perfect solution for storing critical data and applications. Technophiles and hobbyists are attracted by the construction and operation of this Cisco 1 TB hard drive. The vast storage space found on the Cisco R200D1TC03 enables you to save all your software applications, high-definition videos, and digital camera pics with room ..
26-pin Smart Serial DTE - DCE M/M Crossover Cisco CableCable works with 2-port Cisco WIC cards WIC-2T and WIC-2A/S..
The DS-SFP-FCGE-LW SFP Module is hot-swappable transceivers that plug into ports on the Cisco MDS 9000 Family director switching modules and fabric switches. This transceiver give users the flexibility to choose different cabling types and distances on a port-by-port basis.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: DS-SFP-FCGE-LW Brand Name: Cisco Product Model: DS-SFP-FCGE-LW Product Name: DS-SFP-FCGE-LW SFP Module Product Type: SFP Application/Usage: Data Networking Interfaces/Ports: 1 x..
The DS-SFP-FCGE-SW SFP Module is hot-swappable transceivers that plug into ports on the Cisco MDS 9000 Family director switching modules and fabric switches. This transceiver give users the flexibility to choose different cabling types and distances on a port-by-port basis.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: DS-SFP-FCGE-SW= Brand Name: Cisco Product Model: DS-SFP-FCGE-SW Product Name: DS-SFP-FCGE-SW SFP Module Product Type: SFP Application/Usage: Data Networking Interfaces/Ports: 1 ..
The Cisco1-Gbps Wideband Shared Port Adapter supported in the Cisco uBR10012 Universal Broadband Router, enables cable operators to offer high-speed broadband connectivity at scale and to enable new IP services. This product facilitates supporting the SPA in the Cisco uBR10012 I/O chassis slots.Channel bonding, Industry-leading port density, Utilizes the modular CMTS architectureManufacturer: Cisco Systems, Inc Manufacturer Part Number: UBR10-2XDS-SIP Brand Name: Cisco Product Name: 1-Gbps Wideband Shar..
The Cisco 1-Gbps wideband shared port adapter (SPA) for the Cisco uBR10012 Universal Broadband Router enables cable operators to offer high-speed broadband connectivity at scale and to enable new IP services. This product supports both the traditional DOCSIS 1.x and 2.x cable modems and the emerging wideband solutions. The new Cisco 1-Gbps wideband SPA works in conjunction with the Cisco 5x20U Broadband Processing Engine to meet the ever-increasing needs of cable operators that are delivering IP-based data,..
Secure and Easy to Manage The Cisco SPA512G was designed to simplify installation, while providing enhanced security for complete peace of mind. It utilizes standard encryption protocols to perform secure remote provisioning and unobtrusive in-service software upgrades. Secure remote provisioning tools include detailed performance measurement and troubleshooting features, enabling network providers to deliver high-quality support to their subscribers. Remote provisioning also saves service providers the tim..
Cisco QSFP+ to QSFP+ copper direct-attach cables are suitable for very short distances and offer a highly cost-effective way to establish a 40-Gigabit link between QSFP+ ports of Cisco switches within racks and across adjacent racks. Cisco currently offers passive cables in lengths of 1, 3 and 5 meters.Product Name: 1M Cable Passive Cop 40GBASE-CR4 Product Type: Network Cable Connector on First End: 1 x Male QSFP+ Connector on Second End: 1 x Male QSFP+ Color: Tangerine Product Model: QSFP-H40G-CU1M Devic..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: CAB-INF-28G-1= Brand Name: Cisco Product Name: CX4 Patch Cable Product Type: Network Cable Cable Characteristic: Patch Cable Cable Length: 3.28 ft Compatibility: Cisco - 10GBASE-CX4 Module..
IEEE 802.3z-compliant optical fiber assembly consisting of a single-mode fiber permanently coupled off-center to a 62.5-micron multimode optical fiber with duplex SC connectors at one end and duplex LC connectors at the other end. The patch cord is 1 meter (3.28 feet) in length.Product Name: Cisco Mode Conditioning-Patch Cable LC Connector Product Type: Network Cable Cable Characteristic: Patch Cable Connector on First End: 2 x LC Male Network Connector on Second End: 2 x SC Male Network Cable Type: Fiber..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: SPA-1XTENGE-XFP Brand Name: Cisco Product Name: 1-Port 10 Gigabit Ethernet Shared Port Adapter Product Type: Shared Port Adapter Application/Usage: Data Networking Application/Usage: Optical Network Expansion Slots: 1 x XFP Management: CLI SNMP QoS MIB RMON VLAN Dimensions: 0.8" Height x 6.8" Width x 7.3" Depth Weight (Approximate): 12.00 oz Compatibility: Cisco Networking Products: Catalyst 6500 Series Switches 7600 Series Routers 12000 Series Rout..
The WS-G6483 OIM provides one serial 1550-nm 10-Gigabit Ethernet port through an SC connector. The WS-G6488 OIM provides one serial 1310-nm 10-Gigabit Ethernet port through an SC connector. The switching module is upgradable to support distributed forwarding with an optional Distributed Forwarding Card (WS-F6K-DFC).Manufacturer: Cisco Systems, Inc Manufacturer Part Number: WS-G6488= Brand Name: Cisco Product Model: WS-G6488 Product Name: 1-Port 10-Gigabit Ethernet Base Module Product Type: Expansion Modul..
The 1-port 10-Gigabit Ethernet switching module (WS-X6502-10GE) consists of a 10-Gigabit Ethernet Base Module (WS-X6502-10GE) and an Optical Interface Module (OIM). The switching module is upgradable to support distributed forwarding with an optional Distributed Forwarding Card (WS-F6K-DFC).Spare Product, The QoS port architecture (Rx/Tx) for this module is 1p1q8t/1p2q1tManufacturer: Cisco Systems, Inc Manufacturer Part Number: WS-X6502-10GE= Brand Name: Cisco Product Name: 1-Port 10-Gigabit Ethernet Sw..
Ideal for a wide range of LAN applications, the Fast Ethernet network modules support many internetworking features and standards. This single port network module offers 100BaseFX Ethernet.LAN-to-LAN Routing, Uplink to Fast Ethernet backbones on Catalyst series switches and other Cisco routersManufacturer: Cisco Systems, Inc Manufacturer Part Number: NM-1FE-FX-V2 Brand Name: Cisco Product Name: 1-Port Fast Ethernet Network Module Product Type: Network Module Application/Usage: Data Networking Interface..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: ONS-SC-GE-LX Brand Name: Cisco Product Model: ONS-SC-GE-LX Product Name: 1-Port 1000Base-LX SFP Module Product Type: SFP Application/Usage: Data Networking Interfaces/Ports: 1 x 1000Base-LX Interfaces/Ports Details: 1 x LC 1000Base-LX Data Transfer Rate: 1 Gbps Gigabit Ethernet Compatibility: Cisco ONS 15300 Series..
Catalyst 2900 Series XL switch modules are high-performance, field-installable expansion cards that enable users to grow their networks, minimize network downtime, and migrate to new technologies as their needs change.Hot-swappable, Autonegotiation of duplex mode and flow control, IEEE 802.1Q VLAN trunk support, ISL trunk support, Up to 8192 MAC addresses on each modular switch, Support for Catalyst 2900 XL series Cisco IOS Release 12.0(5)XU or later, Gigabit EtherChannel support, Gigabit Interface Conver..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: WS-X2821 Brand Name: Cisco Product Model: WS-X2821 Product Name: WS-X2821 One-port 100Base-FX Module Product Type: Expansion Module Application/Usage: Data Networking Interfaces/Ports: 1 x 100Base-FX LAN Interfaces/Ports Details: 1 x SC 100Base-FX LAN Connectivity Media: Fiber 100Base-FX Data Transfer Rate: 100 Mbps Fast Ethernet Compatibility: Cisco Catalyst 2820 Series Switches..
Compatible with Cisco 7200 and 7500 Series Routers. The PA-FE-FX single-width port adapters provide a 100-Mbps, 100BASE-FX Fast Ethernet interface and supports both full-duplex and half-duplex operation for the 7200/7200VXR/7500 series router...
The Fast Ethernet port on the PA-FE-TX has an RJ-45 connector to attach to Category 5 foil twisted-pair (FTP) for 100BASE-TX. The MII connector permits connection through external transceivers to multimode fiber for 100BASE-FX, or to Category 3, 4, and 5 FTP for 100BASE-T4 physical media...
The Cisco ASR 900 Ethernet interface modules are designed to give customers flexibility and value. All Ethernet interface modules share a common core that supports time-stamping on the module for Y.1731 operations, administration, and maintenance (OAM) delay measurement functions, to achieve precise results for one-way and two-way delay measurement. The modules also provide time-stamping functions for the IEEE 1588-2008 protocol. These time stamps help ensure that the Cisco ASR 903 Router achieves outstandi..
The Digital J1 Packet Voice Network Module provides a flexible and scalable J1 voice and fax solution for the Cisco 2600, 2600XM, 3600 and 3700 series multi service Modular Access routers and supports up to 30 voice channels in a single network module. A single packet voice network module supports connections to Japanese Private Branch Exchanges (PBXs), and is compliant with the J1 TTC JJ20 standard.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: NM-HDV-1J1-30 Brand Name: Cisco Product Model: N..
These flexible interface cards support multiple integrated data, voice and video applications, facilitating the migration from data only as well as circuit-switched voice/video services to a packet voice/video solution.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: VWIC3-1MFT-G703 Brand Name: Cisco Product Model: VWIC3-1MFT-G703 Product Name: VWIC3-1MFT-G703 Multiflex Trunk Voice/WAN Interface Card Product Type: WAN Module Application/Usage: Wide Area Network Interfaces/Ports: 1 x T1/E1 WAN In..
These flexible interface cards support multiple integrated data, voice and video applications, facilitating the migration from data only as well as circuit-switched voice/video services to a packet voice/video solutionProduct Type: WAN Module Application/Usage: Voice, Wide Area Network Interfaces/Ports: 1 x T1/E1 WAN Interfaces/Ports Details: 1 x T1/E1 Network WAN Dimensions: 0.8" Height x 3.1" Width x 4.7" Depth Weight (Approximate): 2.88 oz Compatibility: Cisco 1900 Series Router Chassis , Cisco 2900 Se..
The Cisco 1-Port 4-Wire 56-/64-kbps CSU/DSU WAN Interface Card (HWIC-1DSU-56K4) performs the channel service unit/data service unit (CSU/DSU) functions for both digital data service (DDS) (dedicated) and 4-wire switched 56-kbps (56K) data networks. In addition, it provides an all-rate synchronous interface to any dedicated DDS point-to-point or multipoint network compatible with AT&T Publication 62310. The new card also supports 4-wire switched 56K data services such as AT&T's Accunet 56 or Sprint's VPN-56 ..
The new ADSL HWIC provide 1-port ADSL connectivity to a WAN. This HWIC, combined with the Cisco 1841 integrated services router (ISR) and the Cisco 2800 and 3800 series integrated services routers (ISRs), provide high-speed digital data transmission between customer premises equipment (CPE) and a central office. This enables service providers and resellers to offer additional services by supporting features for business-class security, voice integration, differentiated classes of service (CoS), and managed ..
The ADSL WAN interface cards (WICs) on the Cisco 1700/2600/3700 series routers deliver business class ADSL over ISDN (through WIC-1ADSL-I-DG) services for small and medium-sized businesses to enterprise branch officesKey Features: Supports ADSL over ISDN, UR-2/Annex B G.992.1 (G.dmt), Complies with ANSI T1.413 issue 2 Supports ATM AAL5 Supports ATM Class of Service features CBR, VBR-nrt, VBR-rt, UBR Supports IP QoS Supports up to 23 virtual circuits on WIC Supports Dying Gasp functionality Applications ..
The ADSL WAN interface cards (WICs) supported on the Cisco 1700/2600/3700 series routers are also supported on the Cisco 1800 (modular), 2800, 3800 series Integrated Services Routers (ISRs). These WICs deliver business class ADSL over basic telephone service or otherwise known as Plain Old Telephone Service (POTS) (through WIC-1ADSL and WIC-1ADSL-DG) and ADSL over ISDN (through WIC-1ADSL-I-DG) services for small and medium-sized businesses to enterprise branch offices. These ADSL WICs, combined with the Cis..
Product Name: 1 Port ADSL WAN Interface Card (Refurbished) Product Type: WAN Interface Card (WIC) Compatibility: Cisco Series Routers: 1700, 1711, 1712, 1720, 1721, 1750, 1750-4V, 1751, 1760, 1760-V3PN, 1841, 1841, 2611XM, 2621XM, 2651XM, 2811, 2821, 3745, 3825 Dimensions: 0.8" Height x 3.1" Width x 4.4" Depth Application/Usage: Wide Area Network, Data Networking Interfaces/Ports: 1 x ADSL WAN Interfaces/Ports Details: 1 x RJ-11 ADSL Network WAN Management: QoS Data Transfer Rate: 8 Mbps Package Type: Retai..
Cisco's 1-Port Modem WAN Interface Card is now available for the award-winning Cisco 1800, 2600XM, 2691, 2800, 3700, and 3800 Series modular router platforms. The interface card provides cost-effective basic telephone service connectivity to allow remote router management, asynchronous dial-on-demand routing (DDR) and dial backup, dial- and fax-out modem access, and low-density remote-access- server (RAS) services. Combined with the differentiated services delivered through Cisco IOS Software, the Cisco 180..
The Enhanced ATM E3 Port Adapter is an enhanced asynchronous transfer mode (ATM) port adapter and has single port, single and dual wide ATM port adapter. It is designed with a high performance, dual segmentation and reassembly (SAR) architecture with local buffer memory. It combines high performance and a wide array of new ATM features that are ideal for both enterprise wide area network (WAN) and service provider backbone applicationsIETF RFC 2684 support for multiple protocol encapsulations over ATM, IE..
