The ATM interface processor (AIP) provides a single ATM network interface for Cisco 7000 series and Cisco 7500 series routers. The AIP provides a direct connection between the high-speed Cisco Extended Bus (CxBus and CyBus) and external ATM networks. A physical layer interface module (PLIM) on the AIP determines the type of ATM connection. There are no restrictions on slot locations or sequence; you can install an AIP in any available interface processor slot...
The ATM dual PHY OC-12 LANE/MPOA module (SMF) provides one direct connection and one standby connection between the 622-Mbps ATM network and the Catalyst 5000 family switch using two single-mode (SC) fiber-optic connectors.Spare Product, Support for ATM AAL 5, MPOA support, Reassembly of up to 255 buffers simultaneouslyManufacturer: Cisco Systems, Inc
Manufacturer Part Number: WS-X5162=
Brand Name: Cisco
Product Model: WS-X5162
Product Name: 2-Port OC-12 ATM Module
Product Type: ATM Module
Application/U..
The ATM OC-3c/STM-1 Network Module developed for the Cisco 3600 modular access routers provides a single-port SONET and SDH-based OC-3c/STM-1 interface for worldwide use. This module is designed to support the convergence of data, voice, and video services that allow customers to migrate existing voice and video traffic onto a corporate data network for substantial cost savings.1260 to 1360 nm Wavelength, Class A EMI, RFC 1483 support for multiple encapsulations over ATM, ATM PVCs and SVCs, Layer 2 per-VC..
The Cisco NM-1A-OC3-POM network module is a high performance single-width, single-port ATM network module, utilizing an optical carrier level 3 (OC-3) link. The ATM interface is a small form-factor pluggable (SFP) optical port. Fiber-optic cables to the network are attached to an SFP module that is inserted into the SFP port. The mode of operation is determined by the SFP module that is used.Supports 3 modes of operation: Multimode (MM). Single mode intermediate reach (SMIR). Single mode long reach (SMLR)..
The Catalyst 8510 MSR/LightStream1010 ATM Router Module (ARM) provides high-speed interworking between the Asynchronous Transfer Mode (ATM) and Layer 3 environment interfaces in a single chassis. The ARM is supported by the Catalyst 8510 MSR and LightStream 1010 platforms, providing large enterprises and service providers with a wide range of Layer 3 and ATM interfaces for building integrated solutions. The ARM can be used with the Catalyst 8510/LightStream 1010 ATM (T1 up to OC-12) and Layer 3 (Gigabit Eth..
The Cisco Catalyst 8540 MSR ATM Router Module II (ARM II) provides high-speed inter-working between the asynchronous transfer mode (ATM) and Layer 3 functions in a single chassis. The ARM II is supported on the Catalyst 8540 MSR platform, a high-end multiservice switch that provides large enterprises and service providers with a wide range of Layer 3 and ATM interfaces for building integrated solutions.256K built-in memory, Integrated access control lists (ACLs), Online insertion and removalManufacturer..
This is an ATM switch processor for the Cisco LightStream 1010 Switch -- comes with FC-Per-Class Queuing ( FC1 )The ATM Switch Processor (ASP) is a main system processor, which supports both the ATM switch fabric, together with its field-upgradable feature card, and the high-performance RISC processor, which provides the central intelligence for the device. The ASP module supports all of the cell-relay and signaling and management processing functionality of the switch. The ASP itself supports the 5-Gbps,..
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: ACS-2600ASYN=
Brand Name: Cisco
Product Name: Network Cable
Package Type: Retail
Product Type: Network Cable
Connector on First End: 1 x RJ-45 Male
Connector on Second End: 1 x RJ-45 Male
Conductor: Copper..
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: CABRSP2AUX
Brand Name: Cisco
Product Name: Auxiliary Y-Cable
Product Type: Data Transfer Cable
Number of Ways: 2-way
Connector on First End: 1 x 25-pin DB-25 Male
Connector on Second End: 2 x 25-pin DB-25 Female
Conductor: Copper..
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: AXRJ48T3T1
Brand Name: Cisco
Product Model: AXRJ48T3T1
Product Name: AXRJ48T3T1 Back Card
Product Type: Service Module
Application/Usage: Data Networking
Interfaces/Ports: 8 x T1 WAN
Interfaces/Ports: 1 x T3 WAN
Interfaces/Ports Details: 8 x RJ-48 T1 WAN
Interfaces/Ports Details: 1 x RJ-48 T3 WAN
Data Transfer Rate: 1.54 Mbps T1
Data Transfer Rate: 44.74 Mbps T3
Compatibility: MGX 8200 AIMUY Trunking Module..
The Cisco MGX 8850 AXSM Enhanced (AXSM-E) ATM Switching Module is a high-density, double height service module for use in the Cisco MGX 8850 Multiservice Switch in combination with the high-capacity PXM-45 processor switching module. The AXSM Enhanced ATM Switching Module, in conjunction with the PXM-45, AXSM (Broadband ATM Switch Service Module), and Route Processor Module (RPM), offers the industry's most advanced and reliable ATM networking features, such as Private Network-Network Interface (PNNI), swit..
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: BCUAI4T1DB15
Brand Name: Cisco
Product Model: BC-UAI-4-T1-DB15
Product Name: BC-UAI-4-T1-DB15 Back Card
Product Type: Service Module
Application/Usage: Data Networking
Interfaces/Ports: 4 x T1 WAN
Interfaces/Ports Details: 4 x DB-15 T1 WAN
Data Transfer Rate: 1.54 Mbps T1
Compatibility: Cisco IGX 8400 series Switches..
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: BC-UAI-8-T1-DB15
Brand Name: Cisco
Product Model: BC-UAI-8-T1-DB15
Product Name: BC-UAI-8-T1-DB15 Back Card
Product Type: Service Module
Application/Usage: Data Networking
Interfaces/Ports: 8 x T1 WAN
Interfaces/Ports Details: 8 x DB-15 T1 WAN
Data Transfer Rate: 1.54 Mbps T1
Additional Information: Back Card for UXM
Compatibility: Cisco IGX 8400 Series Switches..
Clock Rate:N x 64 KHz, where N can be in the range of 1 to 32, N x 1.024 KHz, where N can be in the range of 2 to 10Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: BCUFI12X21
Brand Name: Cisco
Product Model: BC-UFI-12X21
Product Name: BC-UFI-12X21 Back Card
Product Type: Service Module
Application/Usage: Data Networking
Interfaces/Ports: 12 x Serial X.21
Interfaces/Ports Details: 12 x DB-60 Serial X.21
Connectivity Media: Serial Cable
Data Transfer Rate: 56 Kbps to 10.24 Mbps Serial X.21
Compat..
In today's busy network environments, business continuity relies on effective network intrusion prevention to stop malicious attacks, worms, and application abuse before they affect your data and resources. Cisco IPS 4270 Security Sensor Appliance is a core components of Cisco's intrusion prevention solution. Using Cisco IPS Sensor Software's inline prevention technology, Cisco IPS 4200 Series Sensors accurately detect, classify, and stop malicious traffic.The 4-Gbps performance for IPS 4270-20 is based o..