Cisco WS-SUP720 Catalyst 6500/7600 Supervisor Engine

As Cisco's premier modular multilayer switch, the Catalyst 6500 series delivers secure, converged services from the wiring closet to the core, from the datacenter to the WAN edge. The Supervisor Engine 720 is part of the Catalyst 6500's third generation suite of modules intended to continue lowering the total cost of ownership (TCO).

Item Included: Catalyst 6000 Sup2 Mem, 512MB DRAM Option (MEM-S2-512MB), MSFC2 Memory Option 512 MB (MEM-MSFC2-512MB). Extends investment protection in existing Catalyst 6500 deployments and is fully compatible with all existing modules, Enables new applications and services with h/w accelerated IPv6, MPLS, GRE and NAT as well, Increases slot efficiency by integrating a high performance 720 Gbps switch fabric backplane with a new routing and forwarding engine, including a third generation policy feature card (PFC3), Simplifies Network Operations with a wide range of features, Ideal for high performance backbone and datacenter service provider and enterprise environments, Forwarding architecture: Uses centralized and distributed forwarding modes of operation based on CEF, dCEF, and aCEF, Layer 2-4 forwarding: Support for Layer 2-4 forwarding and Layer 2-4 services, MAC addresses: Up to 64K, Forwarding rate: Up to 400 Mpps per system, Bandwidth: 720 Gbps, integrated switch fabric, Layer 2-3 traffic classification and marking: Layer 2 and Layer 3, Multilayer (Layer 3) switching: IPv4 and IPv6 MPLS switching support in hardware, Distributed forwarding: Supports aCEF and dCEF distributed forwarding, Distributed Cisco Express Forwarding (dCEF): With dCEF720 and dCEF256 interface modules, Accelerated Cisco Express Forwarding (aCEF): With aCEF720 interface modules, Cisco Express Forwarding (CEF): With CEF256 and Classic interface modules, Hardware-based forwarding engine: PFC3 on board, MSFC daughter card version: MSFC3 on board, Switch Fabric Module (SFM) supported: Integrated switch fabric, Two Gigabit Ethernet uplink ports; either two Gigabit Small Form Factor Pluggable (SFP) ports or one Gigabit SFP port and one 10/100/1000 RJ-45 port

Product Name: Catalyst 6500/7600 Supervisor (Refurbished)
Product Type: Supervisor Engine
Compatibility: 6503, 6506, 6509, 6509-NEB, 6509-NEB-A, 6513, 7603, 7606, 7609, OSR-7609, 7613
Product Model: 720
Dimensions: 1.6" Height x 15.3" Width x 16.3" Depth
Expansion Slots: 2 x SFP (mini-GBIC), 2 x PCMCIA
Application/Usage: Data Networking
Interfaces/Ports Details: 1 x RJ-45 10/100/1000Base-T Uplink, 1 x RJ-45 Console Management
Certifications & Standards: Safety Certifications: UL 1950, EN 60950, CSA-0C22.2 No. 950, IEC 950 Electromagnetic Emissions Certifications:, FCC 15J Class A, VCCI CE II, CE mark, EN 55022 Class B, CISPR 22 Class B. IEEE 802.1x and 802.1x extensions
Humidity: 10% to 90% Non-condensing Relative Humidity
Management: The Supervisor Engine 720 provides a comprehensive set of management tools to provide the required visibility and control in the network: Console management: Provides shared interface to the Supervisor Engine 720 and the Multilayer Switch Feature Card 3 (MSFC3) available out-of-band from a local terminal or remote terminal connected through a modem to the console or auxiliary interface, In-band management: Provides shared interface to the Supervisor Engine 720 and the MSFC3 available in-band via SNMP, Telnet client, Bootstrap Protocol (BOOTP), and Trivial File Transfer Protocol (TFTP), Switched Port Analyzer (SPAN): Allows management and monitoring of switch traffic, Remote Switched Port Analyzer (RSPAN): Allows centralized management and monitoring by aggregating and directing traffic from multiple distributed hosts and switches to a remotely located switch via trunk link, VLAN access-control-list (VACL) capture: Directs traffic to a network-analysis or intrusion-detection port via an ACL
Data Transfer Rate: 10 Mbps Ethernet, 100 Mbps Fast Ethernet, 1 Gbps Gigabit Ethernet
Scalability: The Cisco Supervisor Engine 720 provides scalable performance - up to 400 Mpps with 720 Gbps bandwidth - which is required in high-throughput network cores and data centers with multigigabit trunks, The Supervisor Engine 720 uses the Cisco Express Forwarding routing architecture, which performs high-speed lookups even with advanced Layer 2-4 services enabled and independent of the number of flows through the switch providing up to 400 Mpps of forwarding performance
Temperature: 32F (0C) to 104F (40C) Operating, -40F (-40C) to 167F (75C) Storage
Protocols: TCP/IP
Memory: 512 MB DRAM Supervisor Engine Installed, 1 GB DRAM Supervisor Engine Upgradeable, 512 MB DRAM Installed, 128 MB CompactFlash (CF) Card Supported, 256 MB CompactFlash (CF) Card Supported, 512 MB CompactFlash (CF) Card Supported, 1 GB CompactFlash (CF) Card Supported, 64 MB Boot Flash Installed
System Requirements: The Supervisor Engine 720 can be used with one of the following operating systems: Cisco IOS Software for the supervisor engine, Hybrid: Catalyst OS and Cisco IOS Software for the MSFC Supervisor Engine 720 Requirements:, The Supervisor Engine 720 cannot be installed in the Catalyst 6000 Series switches, The Supervisor Engine 720 must be installed in slots 1 or 2 in 3-slot chassis, slots 5 or 6 in 6-slot and 9-slot chassis, and slots 7 or 8 in a 13-slot chassis, The Supervisor Engine 720 requires the installation of a variable-speed fan tray and a 2500 W (minimum) power supply in the chassis