Transition Networks E-100BTX-FX-05(SM) 100Base-TX to 100Base-FX Standalone SM SC Media Converter

Transition Networks' 100BASE-TX to 100BASE-FX Media Converter makes cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.

Operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan., Round trip delay of only 40 bit times - far below the Class II rating of 92 bit times., Automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub., Automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure., The converters will also automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link., Pause is a component of Auto-negotiation and because Auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without our converters. Enabling the Pause feature on the converters betwen two switches allows users to take advantage of this flow control feature on their equipment. Auto-Cross:, AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration. N-Way Auto-Negotiation:, Only Transition Networks guarantees compatibility with any 10/100 compliant port. This feature allows you to force the proper port configuration through an external switch on the converter, unlike competitive products that ship in Auto-Negotiation mode and may require both hardware and software configuration. Fiber Optic Connector:, Min TX PWR: -15.0 dBm, Max TX PWR: -8.0 dBm, RX Sensitivity: -31.0 dBm, Max In PWR: -8.0 dBm, Link Budget: 16.0 dB Switches:, SW1: Auto-Negotiation On/Off, SW2: Pause TX On/Off, SW3: LPT On/Off, SW4: FEF On/Of Jumpers:, Jumper Block 1: Auto Cross enable

Product Name: E-100BTX-FX-05 (SM) 100BTX to 100BFX SM SC Stand-Alone Media Converters
Product Type: Transceiver/Media Converter
Ethernet Technology: Fast Ethernet
Number of Network (RJ-45) Ports: 1
Network (RJ-45): Yes
Number of SC Ports: 1
Media Type Supported: Twisted Pair, Optical Fiber
Fiber Mode Supported: Single-mode
Total Number of Ports: 2
Height: 3.0"
Width: 1.0"
Depth: 4.8"
Product Model: E-100BTX-FX-05(SM)
Network Technology: 100Base-TX, 100Base-FX
Maximum Distance Supported: 12.42 Mile
SC Port Type: Duplex
Color: Black
Certifications & Standards: UL Listed, FCC Class A, EN55024, EN55022 Class A, EN61000, CE Mark, IEEE 802.3 100BASE-FX, 100BASE-TX
Input Voltage: 9 V DC